Table of Contents
Advertisement
BASIC PLAYBACK
Speaker
Stop Button (5)
Rewind Button (2)
Play/Pause Button (4/6)
Fast-Forward Button (3)
NOTES:
● If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To
turn on again, set the Power Switch to "OFF", then to "
● The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (
● You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.
● LCD monitor/viewfinder indications:
• When power is supplied from a battery: the "
When power is supplied through the DC cord: "
• During Stop mode, none of the indications are displayed.
● When a cable is connected to the AV or PHONE connector, the sound is not heard from the speaker.
Still Playback:
Pauses during playback.
1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.
● If still playback continues for more than about 3 minutes, the camcorder's Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the camcorder's power is automatically turned off.
● When 4/6 is pressed, the image may not pause immediately while the camcorder stabilises the still image.
Shuttle Search:
Allows high-speed search in either direction.
1) Press 3 for forward or 2 for reverse search during playback.
2) To resume normal playback, press 4/6.
● During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you
release it, normal playback resumes.
● A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
Frame-By-Frame Playback:
1) Engage Still Playback.
2) Rotate the MENU wheel towards "L" for forward Frame-By-Frame Playback, or towards "M" for reverse
Frame-By-Frame Playback during Still Playback.
● To resume normal playback, press 4/6.
● You can also use the provided remote control for Frame-By-Frame Playback (
Slow-Motion Playback, Playback Zoom and Playback Special Effects
Available only with the remote control (provided) (
During Shuttle Search, parts of the picture may not be clearly visible, particularly on
the left side of the screen.
Playback From Tape
Power Zoom Lever
(VOLUME)
VIDEO/MEMORY
Switch (Open the
LCD monitor to
access this switch)
" battery pack remaining power indicator is displayed.
" does not appear.
Allows frame-by-frame search.
ATTENTION
1
Load a tape (
2
Set the VIDEO/MEMORY Switch to "VIDEO", then
set the Power Switch to "
the Lock Button located on the switch. To start
playback, press 4/6.
• To stop playback, press 5.
• Press 2 to rewind, or 3 to fast-forward the tape
during Stop mode.
To Control The Speaker Volume . . .
..... slide the Power Zoom Lever (VOLUME) towards
"+" to turn up the volume, or towards "–" to turn
down the volume.
".
pg. 64, 65).
EN
pg. 12).
" while pressing down
pg. 54).
pg. 64).
25
Advertisement
Table of Contents
