Advertisement
Quick Links
Advertisement
Related Manuals for NCR 7409-K314
Summary of Contents for NCR 7409-K314
- Page 1 7409‐K314 Fixed Angle Mount Imaging Scanner Kit Instructions Issue A...
-
Page 2: Revision Record
Revision Record Issue Date Remarks Sept 2012 First Issue... - Page 3 Introduction This kit provides a Faceplate Cable Cover with an N5680 Imaging Scanner for the NCR SelfServ 60 (7409). The assembly installs on the front of the 7409‐K035 Fixed Angle Mount. Components Screw, 6-32 x 0.312, Ph, PH, Black 006-8616632 Fixed Angle Mount Cable Cover 497-0476288 Screw, 6-32 x 0.312, Ph, PH, Black 006-8616632 N5680 Imager 497-0476023 Screw, 6-32 x 0.312, Ph, PH, Black 006-8616632 Fixed Angle Mount Imaging Scanner Faceplate 497-0476287 USB Cable, Type A to Micro B right Angle, 12”...
-
Page 4: Installation Procedures
Installation Procedures 1. Remove the screws (2) in the sides of the Fixed Angle Mount. Screw (One each side) 31462 2. Rest the bottom of the display on the Display Support. 31469 Display Support Note: Place the Display Support behind the extension on then Display Hinge Bracket. - Page 5 3. Remove the terminal Cable Cover (1 captive screw). Cable Cover 31468 4. Remove the Blank Faceplate from the Fixed Angle Mount (2 screws). Blank Faceplate 31464...
- Page 6 5. Install the Fixed Angle Mount Faceplate on the front of the Fixed Angle Mount (2 screws). Fixed Angle Mount Faceplate 31466 6. Install the Imaging Scanner on the Fixed Angle Mount Cable Cover (3 screws). Fixed Angle Mount Cable Cover Imaging Scanner 31465...
- Page 7 7. Connect the USB Cable to the scanner. 31471 8. Install the Faceplate and Scanner Assembly on the terminal (3 screws). Faceplate and Scanner Assembly 31472...
- Page 8 9. Connect the USB Cable to the terminal I/O Panel. Line Out 2 Line Out 1 Power I - I DC In RS232/B RS232/A Terminal Power USB Ports 27661 10. Lower the Display back to the operating position on the Fixed Angle Mount and secure it with screws (2). Screw (One each side) 31462...