Page 1
KIT INSTRUCTIONS 2D Scanner with Top Blank Release 1.0 7761-K154 Issue A...
Page 2
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
7761-K154 (2D Scanner with Top Blank) Installation Procedure 1. Remove the Blank Plate from the back housing. 2. Plug in 2D scanner cable into extension cable (1). Gently push cables into rear housing.
Page 6
7761-K154 (2D Scanner with Top Blank) 3. Hook the 2D scanner module into housing and snap into place. 4. Secure module with screw (1).