Getting Connected - Wasp WRS100SBR Quick Manual

BT - HID

GETTING CONNECTED

1. Scan [Disconnect] to delete previous pairing record. Alternatively,
you may long-press the function button for 5 seconds until the
the scanner emit two beeps.
. E031$
2. Scan [BT - HID]; the scanner will emit two beeps.
. E043$
3. Scan either one of below barcodes according to your host system.
. F068$
. F067$
4.
Select "Scanner XXXXXX" on the discovered device list of your Bluetooth.
("XXXXXX" are the last 6 digits of MAC address which can also
be found on the product label)
5. The scanner will emit two beeps to verify the connection.
Disconnect
BT - HID
iOS/MAC/WINDOWS
ANDROID
- 11 -
BT - HID
SMARTPHONE/TABLET TOUCH KEYBOARD
Please follow below instruction to toggle touch keyboard
on smartphone/tablet.
iOS
To toggle iOS touch keyboard, please simply press the function button.
Android
1. Enter "Settings"
2. Enter "Language & input"
3. In Keyboard & input window, tap "Default" to continue.
4. Turn off "Hardware - Physical keyboard", and the Touch
Keyboard will function properly again.
Function Button
- 12 -