Adjusting The Playback Picture; Manual Tracking; Vertical Locking Adjustment; Vhs Index Search System (Viss) - Panasonic DMR-EH75VS Operating Instructions Manual

Adjusting the playback picture

∫ Manual tracking

The unit usually makes tracking adjustments, but you may need to
do it manually if noise appears on a tape recorded on other
equipment.
During play
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the noise disappears.

∫ Vertical locking adjustment

Adjust the vertical synchronization to stop the picture from jiggling
while paused.
This works only while VHS is paused during recording on the DVD.
While paused
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the jiggling stops.
∫ To return to auto tracking
Press both [TRACKING/V-LOCK, r] and [TRACKING/V-LOCK, s]
simultaneously.
∫ To remove the noise from a paused picture
Start slow play, then adjust the tracking.
Note
≥This function may not work with some TV models and tapes.
≥You can also adjust the tracking and vertical synchronization with
[CH, W, X] on the main unit.

VHS Index Search System (VISS)

The unit automatically records special index signals on the tape
every time a recording is started. The index search function makes
use of these index signals to let you find the beginning of a desired
program quickly and easily.
∫ Index signals are recorded in the following cases.
≥When a recording is started by pressing [¥, REC].
Preparation
≥Insert a recorded video cassette. (l 12)
While stopped or during normal play
Press [:] or [9].
≥Each press increases the number of skips.
∫ To cancel the index search
Press [∫, STOP].
Note
≥Up to 20 index signals can be searched for in both directions.
≥If you press either one of the buttons too much, you can control the
number of skips by pressing the opposite button.
≥The figure on the display decreases by 1 each time an index signal
is located.
≥This feature may not work correctly if the index signals are too
close together. Make recordings of at least 5 minutes.

Changing audio

While playing tapes
Press [AUDIO].
The audio changes as follows:
Stereo > Mono L > Mono R > No display (Normal audio track)
^------------------------------------------------------------}

Auto Bilingual Choice Function

When a stereo broadcast or SAP broadcast is recorded and played
back on the unit, stereo sound will be automatically selected in the
case of a stereo broadcast and SAP sound will be automatically
selected in the case of a dual-sound broadcast (Mono and SAP or
Stereo and SAP).
≥This function may not work properly if the program is played back
from a mid point. In a case like this, press [AUDIO] and select the
right sound.
≥The function will not work with a cassette which has been recorded
using external equipment.

S-VHS Quasi Playback (SQPB)

It is also possible to play back tapes recorded in the S-VHS system.
≥Some picture noise may occur depending on the type of tape used.
≥It is not possible to fully obtain the high resolution that S-VHS is
capable of.
≥It is not possible to record in the S-VHS system with the unit.
VHS cassette
6 12
C
49
RQT8346