The GUIDE Plus+ system is available in the following countries: Austria/Belgium/France/Germany/Italy/ Luxembourg/Netherlands/Spain/Switzerland (As of end of June 2007) ≥This service may not be available in some areas in the above countries. ≥There may be changes in the service areas. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011-L...
Page 2
Strømuttaket må befinne seg i nærheten av utstyret og være lett (Tuotteen sisällä) tilgjengelig. Støpslet på strømkabelen må være klart til bruk. (Produktets innside) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 Når dette apparatet skal kobles helt fra strømnettet (AC), må støpslet på strømkabelen trekkes ut av stikkontakten.
Status messages ........45 About descriptions in these operating instructions ≥Pages to be referred to are indicated as “➡ ”. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
M 2 for bilingual Audio Selection)] Bilingual Audio Selection)] Bilingual Audio Selection)] §4 broadcasts Recording 16:9 aspect ≤ ≤ ≤ §4 picture Creating and editing – – – Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 playlists (continued on the next page)
Page 5
“Off” if high speed copy to DVD-R, etc. is not necessary when recording a programme (The default setting is “On”. ➡ 68). §5 +R discs recorded with this unit and +R discs recorded with another Panasonic DVD Recorder may be incompatible. However, discs that are finalised are compatible and can be played.
§2 Select “NTSC” in “TV System” (➡ 73). ≥When playing back a title recorded on the HDD, ensure that you match the “TV System” setting to the title (PAL or NTSC) (➡ 73). Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
USB memory device. (➡ 42, ≥Despite meeting the conditions mentioned above, there may be USB memories that cannot be used for this unit. [Note] ≥This unit does not support to charge the USB device. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
You cannot directly record to a DVD-R DL and +R DL disc on this unit. and +R DL Record to the HDD and then copy to the disc. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 ≥It is not possible to record to both HDD (Hard Disk Drive) and DVD drive simultaneously.
∫ Indemnity concerning recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content (data), and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit (including any other non-HDD related component).
Before moving the unit, ensure the disc tray is empty. DVD lens cleaner: RP-CL720E Failure to do so will risk severely damaging the disc and the ≥This lens cleaner may not be for sale depending on the unit. region. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. Remote control operations (➡ 12) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
G Return to previous screen H Create chapter (➡ 38) AUDIO STATUS DISPLAY TIME SLIP I Skip approx. 30 seconds forward (➡ 38) < J Skip the specified time (➡ 38) K Show on-screen menu (➡ 44) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Lights when a disc that is supported by this unit is inserted in the 7 Main display section indicator tray. 8 Recording mode indicator Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 ≥Indicators for functions that this unit does not support will not light.
≥When connecting to a television with a built-in VCR [Required]setting] Connect to the input terminals on the television side if there are “AV2 Input” and “AV2 Connection” settings in the Setup both television and VCR input terminals. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 menu (➡ 70)
Page 15
VHF/UHF RF OUT or decoder’s rear panel RF IN panel [Required]setting] “AV2 Input” and “AV2 Connection” settings in the Setup menu (➡ 70) Connect the unit directly to the television (➡ 14, [B] ) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
(TV) Red White OPTICAL This unit’s rear panel DIGI DIGITAL AL AUDIO OU UDIO OUT COMPONENT COMPONENT (PCM/BITSTREAM) (PCM/BITSTREAM) VIDEO OUT VIDEO OUT AV2 (DECODER/EXT) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 This unit’s rear panel R-AUDIO-L VIDEO S VIDEO...
Page 17
Regarding VIERA Link “HDAVI Control ” function When connecting with a Panasonic TV (VIERA) or a receiver equipped with the “HDAVI Control” function, linked operations would be possible. [➡ 18, Linked operations with the TV (VIERA Link “HDAVI Control ”/Q Link)] ≥Non-HDMI-compliant cables cannot be utilised.
Even if the TV is set to standby mode, the unit will not be set to standby mode at the same time when recording, copying, finalising etc. ≥When this unit is connected to an “HDAVI Control” compatible Panasonic receiver with an HDMI cable, the receiver will also turn off.
∫ When you want to leave the TV on and set only this unit to standby mode Press [Í DVD] on this unit’s remote control and set to standby mode. ∫ When not using “HDAVI Control” Set “VIERA Link” in the Setup menu to “Off” (➡ 70). Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
If you select “Schweiz”, “Suisse” or “Svizzera” in the Country setting, or when the television tuning setting has been set to Switzerland, the “Power Save” setting menu appears. Select “On” or “Off” (➡ 71). Auto-Setup starts. This takes about 8 minutes. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
≥If you do not want to set up the GUIDE Plus+ system Press [2, 1] to select “No” and press [OK]. To download the GUIDE Plus+ data later (➡ 22, GUIDE Plus+ data download) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
The station names in the Reference list can deviate from the station list. [Note] Changes in the station list in the Setup menu (➡ 71) of your unit will Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 cause all Editor settings to return to the initial condition.
≥Existing information can be lost by changing the Postal Code or Host Channel. ≥Entry of the wrong Postal Code or Host channel can lead to the receipt of wrong or no data. ≥To change the settings, release the unit from recording standby Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 (➡ 33).
SELECT Point the remote control at the television Connection RETURN Others While pressing [Í TV], enter the code with the numbered buttons. [0] ➡ [1] [1] ➡ [0] e.g., (continued on the next page) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Code Brand Code Change the remote control code on the main unit and the remote Panasonic 01/02/03/04 METZ 05/28 control (the two must match) if you place other Panasonic products AIWA MITSUBISHI 05/19/20/47 close together. AKAI 27/30 MIVAR Use “DVD 1”, the factory set code, under normal circumstances.
–You play a disc or start recording to discs other than DVD- inserted. ≥If you eject a disc and close the disc tray, the HDD drive is RAM. automatically selected. –You want to make other operations. –The clock has not been set. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
“Deleting all the contents of a disc—Format” (➡ 63) disc name, select “Top Menu” (➡ 64), “Auto-Play Select” (➡ 64) or “Disc Name” (➡ 62) in “DVD Management” before finalising. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 ∫ To open the tray without disc finalisation...
≥The unit turns off automatically after the time to stop recording is reached. To cancel Press [¥ REC] on the main unit several times until the counter appears. ≥The time to stop recording is cancelled; however, recording continues. To stop recording Press [∫]. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
3 Press [∫]. 4 Press [2, 1] to select “Stop Recording” and press [OK]. [Note] Downloaded From DvDPlayer-Manual.com Panasonic Manuals “Chasing playback” and “Simultaneous rec and play” can only be RQT9011 used with programmes of the same encoding system (PAL/NTSC).
≥If “NTSC” has been selected for “TV System” (➡ 73), the GUIDE Plus+ system cannot be used. ∫ To cancel recording when recording has already begun (➡ 33) ∫ To release the unit from recording standby (➡ 33) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 ∫ Notes on timer recording (➡ 33)
GUIDE Plus+ list. To see programme Additional information (programme name, programme duration, broadcast time, short information description) is available for these (Programmes with the programmes. symbol) Press [ ] to show and hide the Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 information.
∫ To cancel recording when recording has already begun (➡ 33) ∫ To release the unit from recording standby (➡ 33) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 ∫ Notes on timer recording (➡ 33)
Programmes that failed to record are deleted from the timer recording that starts first always has priority, and the recording of recording list at 4 a.m. two days later. the later programme will start only after the first timer recording has finished. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Set “VPS/PDC” to “OFF” when programming a programme whose start time has been programmes listed in the newspaper or subsequently changed. magazine change at a later date. [Note] ≥The beginnings of recordings may not be recorded correctly in some cases. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Press [REC MODE] to select the recording mode. Select the channel on the other equipment. Press [¥ REC]. Recording starts. To skip unwanted parts Press [;] to pause recording. (Press again to restart recording.) To stop recording Press [∫]. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Automatic drive select function (➡ 26) When a music CD is inserted, the menu (➡ below) is automatically displayed. Press [3, 4] to select “Play Music” and press [OK]. Play Music Play starts. Copy Music SELECT RETURN Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Press and hold [1] (PLAY/a1.3). Play speed is quicker than normal. [HDD] [RAM] ≥Press again to return to normal speed. ≥Depending on the disc, some operations may not be possible. (Continued on the next page) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
≥When the recording mode is XP and “Audio Mode for XP Recording” is set to “LPCM” (➡ 69). ≥When “Rec for High Speed Copy” is set to “On” (The default setting is “On” ➡ 68). Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
§2 It may take a few moments for still pictures to display. §3 edit the data. Downloaded From DvDPlayer-Manual.com Panasonic Manuals When there are many files and/or folders, some files may not RQT9011 display or be playable.
If “MP3” is selected: Go to “To play MP3 files on the disc” step 2 on page 41. If “JPEG” is selected: Go to “To play still pictures on the disc” step 4 on page 42 Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
≥Files are treated as tracks and folders are treated as groups. The file list for the group appears. ≥When the DivX or JPEG Menu is displayed, perform steps 1–4 in Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 “To select file type” on page 40 selecting “MP3” in step 4 to change To return to the previous screen the playback mode.
You can also select album with the numbered buttons. e.g., [0] ➡ [0] ➡ [5] [0] ➡ [1] ➡ [5] 115: [1] ➡ [1] ➡ [5] ≥Press [2, 1] to select the previous or next album. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Press [3, 4] to select the setting. NLD: Dutch KOR: Korean FIN: Finnish ¢: ≥Some items can be changed by pressing [OK]. SVE: Swedish MAL: Malay Others NOR: Norwegian VIE: Vietnamese To clear the on-screen menus Press [DISPLAY]. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Noise reduction works for input video. M 1: Monaural broadcast ≥Off: Noise reduction is off. You can record the input signal as it is. § Only when you have set “Progressive” to “On” in the Setup menu (➡ 24). Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
To return to the previous screen ≥Press [DRIVE SELECT] to select the drive containing the recorded Press [RETURN]. title to be edited. ≥[RAM] Release protection (➡ 62). To exit the screen Press [DIRECT NAVIGATOR]. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
≥Use search (➡ 37), Time Slip (➡ 38) to find the desired point. ≥To find the desired point correctly, use Slow-motion (➡ 38) and Frame-by-frame (➡ 38). Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 ≥To skip to the start or end of a title, press [:] (start) or [9] (end).
To exit the screen and press [OK]. Press [EXIT]. FUNCTION MENU Remain 30:00 SP ShowView Record Playback Advanced Copy Recording Playlists Flexible Rec Delete DV Auto Rec Copy Setup To Others HDD Management RETURN Music Server Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
The playlist itself is deleted if you delete all § Chapter the chapters in it. To return to the previous screen Press [RETURN]. § Multiple editing is possible. To exit the screen Press [EXIT]. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Album and picture operation Set up Protection (➡ 51) Cancel Protection You can go back to Album View. Album View To return to the previous screen Press [RETURN]. To exit the screen Press [DIRECT NAVIGATOR]. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Multiple editing is possible. [Note] ≥Timer recordings do not start when performing “Add Pictures”, “Create Album”, “Copy to DVD-RAM” or “Copy to HDD”. ≥You cannot perform “Add Pictures” or “Create Album” to a higher folder. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Deleting titles or pictures during play While playing Press [DELETE ¢]. You cannot delete a picture during a Slide Show. Press [2, 1] to select “Delete” and press [OK]. The title or the picture is deleted. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
DVD-R DL and +R DL is greater than 500 in total. When playing a title recorded on both layers, video and audio may momentarily cut out when the unit is switching layers. (➡ 5) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
To change the order that titles are copied, create a copying list and then copy the contents of the list (➡ 55). Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Press [OK] to register to the list. ≥A check mark appears. Press [;] again to cancel. ≥When you switch between the “VIDEO” and “Playlists” tab, the check mark is cancelled. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 (Continued on the next page)
Page 56
Create copy list. ≥The total data size shown may be larger than the sum of the data sizes for each registered item, because of Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 data management information being written to the copy destination, etc.
Press [2, 1] to select “Yes” and press [OK] to start copying. The disc top menu is displayed. ≥Disc play automatically begins from title 1 when “Title 1” is selected from the “Auto-Play Select” menu when finalising the disc (➡ 64). Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
≥The sequence in which the still pictures are registered on the copy list may not be the same at the copy destination. ≥If still pictures are already contained inside the copy destination Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 folder, the new still pictures are recorded following the existing still...
≥If the space on the destination drive runs out or the number of files/folders to be copied exceeds the maximum (➡ 39), copying will stop partway through. ≥You cannot copy the information about the picture rotation. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
If the DV automatic recording function does not work properly, check the connections and DV equipment settings, and turn the input channel for the equipment you unit off and back on. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 have connected. If that does not work, follow the instructions for manual recording (➡...
HDD. the Music Server screen is being displayed, the burn protection ≥Recording from CDs that do not conform to CD-DA specifications Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011 screen is displayed. To return to the previous screen, press [OK].
0 : 22 Chapter 1 Chapter 2 DVD-RAM ≥When HDD has been selected, “Delete all titles” and “Format HDD” are displayed. To return to the previous screen Press [RETURN]. To exit the screen Press [EXIT]. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
≥You can cancel formatting if it takes more than 2 minutes. The disc must be reformatted if you do this. To return to the previous screen Press [RETURN]. To exit the screen Press [EXIT]. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
≥You cannot finalise discs recorded on other manufacturer’s Selecting whether to show the Top equipment. ≥If you finalise discs recorded on Panasonic equipment other than Menu first—Auto-Play Select this unit, the background selected as “Top Menu” may not be [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] displayed.
≥Spanish ≥Dutch ≥Swedish on the disc, the default language is played. ≥Other ¢¢¢¢ There are discs where you can only switch the language from the menu screen (➡ 37). (continued on the next page) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Page 68
–Recording or copying sound in LPCM (➡ 69, “Audio Mode for When recording from the unit’s DV terminal, select the type of XP Recording”). audio recording from “Audio Mode for DV Input” (➡ 69). Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Page 69
This setting is fixed with “Automatic” if you set “Power Save” if a button is pressed. While using this mode, the (➡ 71) to “On”. standby power consumption can be reduced. (continued on the next page) Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Page 70
When setting video output to “1080p”, we quality, it may be improved by changing the setting. recommend using a Panasonic HDMI cable 5 meters or less in length to prevent video distortion. ≥To enjoy High Quality Video up-converted to 1080p, you ≥Automatic: Automatically selects the output resolution best...
≥If you delete programme position of Host Channel, the GUIDE Plus+ data is also deleted. Manual Tuning (continued on the next page) If you delete programme position of Host channel, GUIDE Plus+ data is also deleted. Continue? Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Page 72
S21 – S41 121 – 141 467.25 MHz) In order to record properly, make the appropriate settings to match (Hyperband) (Hyperband) (INTER the connected equipment. BANDE) ≥Title Page (Auto/Off) § Only for 8 MHz channel raster Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
≥This unit cannot record NTSC signals to discs that already have several times every day. PAL signal recordings. (However, both types of programmes can be recorded onto the HDD.) ≥If “NTSC” has been selected, the GUIDE Plus+ system cannot be used. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Maximum number of titles is recorded on HDD. Please delete unnecessary titles. ≥The DivX VOD content has zero remaining plays. You cannot play it. (DivX) Rental Expired. ≥The operation is prohibited by the unit or disc. — Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Page 75
Inform the dealer of the service number when requesting service. ≥The Child Lock function is activated. X HOLD Press and hold [OK] and [RETURN] simultaneously until “X HOLD” disappears. § The message are alternately displayed. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
If you have a CRT television or a multi system television using PAL mode that is compatible with progressive scan, we cannot recommend progressive output as some flickering can occur. ≥All Panasonic televisions that have 576 (625)/50i · 50p, 480 (525)/60i · 60p input terminals Is my television progressive output —...
Page 77
What will happen if I try to record the ≥New album will be made following the existing album. — same CD multiple times? ≥No, you cannot. Can I transfer the music tracks from HDD — to the disc or USB memory.? Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
≥Set “Rec for High Speed Copy” to “On”, and set the “Aspect for Recording” to “4:3”. It may be possible to adjust the display mode on the TV. Refer to your television’s operating instructions. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Page 79
“Dolby Digital” is set to “Bitstream”. Set “Dolby Digital” to “PCM” or connect using audio cables. ≥There are discs for which audio cannot be changed because of how the disc was created. — Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Page 80
–Immediately after a power failure or the AC mains lead is connected. –For a few minutes after 5:15 am due to system maintenance of this unit. –When the unit is connected with an HDMI cable. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Page 81
≥It takes longer than normal to copy many titles. — ≥You cannot high speed copy to DVD-R titles longer than 6 hours when using other Panasonic — DVD Recorders that are not compatible with EP (8 Hours) mode recording.
Page 82
≥You may be able to copy a “One time only recording” title that was recorded to DVD-RAM — using a different Panasonic DVD Recorder to this unit’s HDD, but play is not possible due to copyright protection. ≥When recording to DVD-RAM using “EP (8 Hours)” mode, play may not be possible on DVD players that are compatible with DVD-RAM.
Page 83
[¥ REC] and [1] (PLAY) on the main unit at the same time for 5 or more seconds. ≥Press and hold [Í/I] on the main unit for 10 seconds. (The settings remain.) To restore the unit if it freezes — due to one of the safety devices being activated Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
This unit supports high- definition video output [720p (750p), 1080i (1125i), 1080p (1125p)] from HDMI AV OUT terminals. To enjoy high-definition video a high definition compatible television is required. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Page 85
Using progressive output, you can enjoy the high-resolution video recorded on media such as DVD-Video. Your television must be compatible to enjoy progressive video. Panasonic televisions with 576 (625)/50i · 50p, 480 (525)/60i · 60p input terminals are progressive compatible. Protection You can prevent accidental deletion by setting writing protection or deletion protection.
AFFILIATES BE LIABLE FOR ANY AMOUNTS REPRESENTING LOSS OF PROFITS, LOSS OF BUSINESS, OR INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE PROVISION OR USE OF ANY INFORMATION, EQUIPMENT, OR SERVICES RELATING TO THE GUIDE PLUSi SYSTEM. Downloaded From DvDPlayer-Manual.com Panasonic Manuals RQT9011...
Environment friendly printed on chlorine free bleached paper. Matsushita Electric Industrial Co., Ltd. Web Site: http://panasonic.net RQT9011-L Pursuant to at the directive 2004/108/EC, article 9(2) F0707KJ0 Panasonic Testing Centre Downloaded From DvDPlayer-Manual.com Panasonic Manuals Panasonic Marketing Europe GmbH. Winsbergring 15, 22525 Hamburg, F.R. Germany...