Changing The Speaker Setting To Suit Your Speaker - Panasonic DMR-EH75VS Operating Instructions Manual

Changing the unit's settings
∫ Changing the speaker setting to suit your
speaker
When connecting with an HDMI cable to an amplifier, use the
following settings on this unit if you cannot set the speaker delay
effect on the amplifier.
A
Front (L)
Complete
Complete
(LS)
Speaker presence and size (A)
Press [3, 4, 2, 1] to select the speaker icon (A) and then
[1]
press [ENTER].
[2] Press [3, 4] to select the setting and then press [ENTER].
Icon examples:
Surround speaker (LS)
≥Large: Select when the speaker supports low-frequency (under
100 Hz) reproduction.
≥Small: Select when the speaker does not support low-frequency
reproduction.
If the subwoofer is set to "No", the front speakers will automatically
be set to "Large". (In this case, we recommend connecting a
speaker that can reproduce bass below 100 Hz.)
Delay time (B)
(Effective when playing multi-channel audio)
If either distance C or E is less than D, find the difference in the
relevant table and change to the recommended setting.
[1] Press [3, 4, 2, 1] to select the speaker icon (B) and then
press [ENTER].
[2] Press [3, 4] to select the setting and then press [ENTER].
L
C
C
D
SW
E
RS
LS
78
RQT8346
Center
B A
A
Front (R)
L R
ms C
0.0
A
SW
Subwoofer
ms
LS RS
0.0
A B A
Surround (RS)
LS
LS
Large Small
C Center speaker
Difference
R
Approx. 34 cm (1 1 / feet)
10
Approx. 68 cm (2 1 / feet)
5
3
Approx. 102 cm (3 / feet)
10
Approx. 136 cm (4 2 / feet)
5
Approx. 170 cm (5 1 / feet)
2
E Surround speakers
Difference
Approx. 170 cm (5 1 / feet)
2
Approx. 340 cm (11 feet)
Approx. 510 cm (16 1 / feet)
2
No
Setting
1.0 ms
2.0 ms
3.0 ms
4.0 ms
5.0 ms
Setting
5.0 ms
10.0 ms
15.0 ms