Using Setup Service To Change The Settings; Tm System - Panasonic DMR-EH55S Operating Instructions Manual

Utilizing the TV Guide On Screen
Refer to the control reference on page 28.
Using SETUP Service to change the
settings of the TV Guide On Screen
system
When "SETUP" is selected in step 3 on page 31
SETUP screen is displayed.
The SETUP service allows you to redo the channel settings,
customize the channel line-up and set the TV Guide On Screen
system's start-up pattern.
SEARCH
SETUP
Change system settings
Change channel display
Change default options
Display setup progress
Access to the TV Guide On Screen
setup screen–"Change system settings"
You can verify any information entered during setup, or completely
redo the setup, for the TV Guide On Screen
1 Press [3, 4] to select "Change system settings" and press
[ENTER].
The information that was set is displayed, and you are asked to
confirm whether it is correct.
ZIP Code - 11111 (USA)
Cable on "RF"
Are the above settings correct?
Yes, everything is correct
Yes, but my channel lineup is incorrect
No, repeat setup process
2 Press [3, 4] to select the message and press [ENTER].
≥"Yes, everything is correct"
–The information that was set will remain intact.
Press [3, 4, 2, 1] to select "Next" and press [ENTER] to
exit the screen.
≥"Yes, but my channel lineup is incorrect"
1 Press [3, 4, 2, 1] to select "Next" and press [ENTER].
2 Press [3, 4, 2, 1] to select one of the channel lineups
and press [ENTER].
Then follow the operation instructions given on screen.
≥"No, repeat setup process"
Press [3, 4, 2, 1] to select "Next" and press [ENTER].
–The TV Guide On Screen
Follow the on-screen prompts to redo the setup (➡ 20,
step 4).
Customizing the channel line-up –"Change
channel display"
You can customize the channel line-up. You can easily change
channel line-up should the cable company occasionally revise their
channel assignments.
1 Press [3, 4] to select "Change channel display" and press
[ENTER].
CHANNEL EDITOR
1 ON
2 ON
TV
3
ON
NWBG
∫ To change the channel position
1 Press [3, 4] to select the channel.
RQT8365
2 Press [2] to select the far left column.
3 Press [3, 4] to change the position.
34
TM
SETUP SCHEDULE
Change system settings
(➡ below)
Change channel display
(➡ below)
Change default options
(➡ right)
Display setup progress
(➡ 35)
TM system
TM system.
TM system setup screen is displayed.
CHANNEL EDITOR
screen
2
PTV-S Cable
5
TV-TR Cable
NWBG Cable 12
system
2 Press [3, 4] to select the channel to customize and press
[ENTER].
Grid Options menu is displayed.
Items that can be set up differ depending on the situation.
TM
Grid Options
go back to Setup
position
channel
done
cancel
TM
re-sort numerically
undo all changes
Press [SUB MENU] to return to the previous screen.
3 Press [3, 4] to select the item and press [2, 1], [ENTER]
or the numbered buttons to change the setting.
Grid Options
position:
channel:
service:
input:
tune channel:
re-sort
numerically:
undo all changes:
Change the initial settings–"Change default
options"
You can change the size of the Information box etc., scheduled
recording, and scheduled reminder default settings.
1 Press [3, 4] to select "Change default options" and press
[ENTER].
2 Press [3, 4] to select the option and press [ENTER].
Items for each option are displayed (➡ 35).
3 Press [3, 4] to select the item and press [2, 1] to change
the setting.
4 Press [3, 4] to select "done" and press [ENTER].
1
on
2
Change the position where the channel
appears in the LISTINGS screen (and
CHANNEL EDITOR)
on: Channel is always displayed in
LISTINGS and SEARCH screen
off: Channel is never displayed in
LISTINGS and SEARCH screen
auto-hide: Display a channel only when
program information is available
Change the service for the channel if there
is more than one service available (e.g.,
cable, over-the-air, antenna, DirecTV, etc.)
Change the input for the channel if there is
more than one input (e.g., RF, IN3, etc.)
Correct the tune channel number using the
numbered buttons
Change the channel order in the LISTINGS
screen (and CHANNEL EDITOR) to
numeric
Reset all channel editor options (and
LISTINGS screen) to their original settings
SEARCH SETUP SCHEDULE
SETUP: CHANGE DEFAULT OPTIONS
General defaults
Record defaults
Remind defaults
Go back to Setup
Continued on next page
Options