To Enjoy Even Higher Picture Quality; Connecting An Amplifier Or System Component - Panasonic DMR-EH55S Operating Instructions Manual

1
STEP Connection
If the antenna connectors don't match
Use one of the following connections to suit the antenna lead to the unit's RF IN terminal, and the 75 ≠ coaxial cable to the antenna terminals on
the equipment (television etc.). Refer to other equipment's operating instructions.
Type
A twin lead
from the antenna
(Flat) Twin lead
300 ≠ cable
A twin lead
from the antenna
and a coaxial
plug
(Flat) Twin lead 300 ≠ cable
(Round)75 ≠
coaxial cable
Two twin
from the antenna
leads
300–75 ≠ transformer

To enjoy even higher picture quality

Connecting to the S VIDEO IN terminal
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
AUDIO IN
R L
Red White
Audio/Video
cable
RF
IN Red White
RF
OUT
VHF/UHF
R-AUDIO-L

Connecting an amplifier or system component

∫ Connection to a stereo amplifier
To OUT 1 or OUT 2
RQT8365 This unit
18
This unit
(Flat) Twin lead
300 ≠ cable
Television
S VIDEO IN
S Video cable
This unit
Y
P B
P
R
COMPONENT
S VIDEO
VIDEO VIDEO OUT R-AUDIO-L V
Amplifier's rear panel
AUDIO IN
R L
Red White
Audio cable
RF
Red White
IN
RF
OUT
VHF/UHF S V
R-AUDIO-L VIDEO
300–75 ≠ transformer
To this unit's RF IN
75 ≠ coaxial
terminal
cable
VHF/UHF band mixer
75 ≠ coaxial
cable
To this unit's RF IN
terminal
VHF/UHF band separator
VHF/UHF band mixer
75 ≠ coaxial
cable
To this unit's RF
IN terminal
Connecting to the COMPONENT VIDEO IN terminals
These terminals can be used for either interlace or progressive output
(➡ 77) and provide a purer picture than the S VIDEO OUT terminal.
Connect to terminals of the same color.
Red White
Audio/Video
cable
RF
Red White
IN
RF
OUT
VHF/UHF
∫ Connecting an amplifier with a digital input terminal
≥To enjoy multi-channel surround sound DVD-Video, connect an amplifier
with a built-in decoder displaying the logo marks below using an optical
digital audio cable and change the settings in "Digital Audio Output" (➡ 62).
≥When this unit is connected to an amplifier with an optical digital
audio cable and connected to a television with an HDMI cable, you
can enjoy the highest quality of audio from the disc by setting
"HDMI Audio Output" to "Off" in the Setup menu (➡ 63). In this
case audio is only output from the amplifier not the television.
≥Before purchasing an optical digital audio cable, check the
terminal shape of the equipment to be connected.
≥You cannot use DTS Digital Surround decoders not suited to DVD.
≥Even if using this connection method, output will be in only 2
channels when playing DVD-Audio.
OPTICAL IN
AV OUT
OPTICAL
DIGITAL AUDIO OUT
O G-LINK (PCM/BITSTREAM)
Other equipment (television etc.)
75–300 ≠ transformer
VHF/UHF band separator
AUDIO IN
COMPONENT
R L Television
VIDEO IN
Component
video cable
Y
P
B
P
R
COMPONENT
R-AUDIO-L VIDEO S VIDEO
VIDEO OUT
Amplifier's rear panel
Optical digital audio cable
Do not bend sharply when connecting.
Insert fully, with
this side facing
up.
This unit
VHF or
UHF
Television
VHF
UHF
Television
VHF
UHF
Television
This unit
R-AUDIO-L VID