Copying A Finalized Dvd-R, Dvd-R Dl, Dvd-Rw (Dvd-Video Format), +R And +R Dl; Copying Mpeg2 Moving Pictures From An Sd Card - Panasonic DMR-EH55S Operating Instructions Manual

Copying titles or playlists
Refer to the control reference on page 50.
Copying a finalized DVD-R, DVD-R DL,
DVD-RW (DVD-Video format), +R and
+R DL
[DVD-V] > [HDD]
You can copy the content of finalized DVD-R, DVD-R DL, DVD-RW
(DVD-Video format), +R and +R DL etc. to the HDD and re-edit.
While playing a disc, the content being played is copied to the HDD
according to the set time.
If you perform search, frame-by-frame or pause while copying, that
portion of title is not recorded.
≥Operations and on screen displays during copy are also
recorded.
≥Almost all DVD-Video on the market have been treated to
prevent illegal copying, and cannot be copied.
≥The following cannot be copied: DVD-Audio, Video CD, Audio
CD and so on.
Preparation
≥Insert the finalized disc (➡ 13).
After performing steps 1–5 ("Content Type" is automatically set to
"DVD-Video") (➡ 50, Copying using the copying list—Advanced
Copy)
6
Set "Time Limit".
≥If you are not going to change the setting (➡ step 7).
∫ Setting the unit to copy according to the set
time
1 Press [3, 4] to select "Time Limit" and press [1].
2 Press [3, 4] to select "Time Limit" and press [ENTER].
≥Setting the unit to copy all the content on the disc
3 Press [3, 4] to select "Off" and press [ENTER].
4 Press [2] to confirm.
Copy will continue until there is not enough available
recording space on the HDD.
≥Setting the copying time
3 Press [3, 4] to select "On" and press [ENTER].
4 Press [3, 4] to select "Set time" and press [ENTER].
Copy
Cancel All
1
Copying Direction
DVD > HDD
2
Mode
DVD-Video XP
3
Time Limit
Start Copying
ENTER
5 Press [2, 1] to select "Hour" and "Min." and press
[3, 4] to set the recording time.
6 Press [ENTER].
7 Press [2] to confirm.
Copying to the HDD continues for the set time even after
the content being played finishes.
≥Set a few minutes longer than the source title, in order to
include the operation time before play begins.
≥You can also set the recording time with the numbered
buttons.
7
Press [3, 4] to select "Start
Copying" and press [ENTER].
Press [2, 1] to select "Yes" and press [ENTER] to start
copying.
The disc top menu is displayed.
≥Disc play automatically begins from title 1 when "First Title
on DVD" is selected from the "Playback will start with:" menu
when finalizing the disc (➡ 58).
RQT8365
52
2 Hour 00 Min.
Set a few minutes longer.
Press ENTER to change the setting.
8
When the top menu is displayed
Press [3, 4, 2, 1] to select the title
you want to start copying, and press
[ENTER].
My favorite
01 02
Chapter 1 Chapter 2
03 04
Chapter 3 Chapter 4
05 06
While playing in order, all the titles after the selected title are
recorded until the set time. (After the last title on the disc has
finished playing the top menu is recorded until the set time is
reached.)
To return to the previous screen
Press [RETURN].
To stop copying
Press [∫].
You can also press and hold [RETURN] for 3 seconds to stop
copying.
≥If stopped partway, copying will be up to that point.
[Note]
≥The screen saver on the right is recorded at the
beginning.
≥The content is recorded as 1 title from the start of
copy to the end.
≥If play does not begin automatically or if the top menu does not
display automatically, press [1] (PLAY) to start.
≥Even if you copy a high quality video/audio DVD, the original
picture and audio quality cannot be exactly replicated.
≥If you want to copy a title from a finalized DVD-RW (DVD Video
Recording format), create a copy list and then copy (➡ 50, Copying
using the copying list—Advanced Copy).
Copying MPEG2 moving pictures from
an SD card
Motion pictures encoded in the MPEG2 format, which have been
taken by a Panasonic SD Video Camera, digital video camera etc,
can be recorded on HDD or DVD-RAM.
(All the recordings on the same date become a title.)
≥You cannot playback MPEG2 moving pictures on an SD card with
this unit.
You must copy the files to the HDD or a DVD-RAM.
≥You cannot playback or record while copying MPEG2.
MPEG2
High-speed copy
The display below automatically appears when you insert a card
into the SD card slot while stopped.
Press [3, 4] to select "Copy video (MPEG2)" and press
[ENTER]. Then go to step 7 on page 51.
How to copy
SD Card Operations
Refer to "Copying using the copying
SD Card inserted.
Select an action or press RETURN.
list—Advanced Copy" (➡ 50)
Go to Album View
Please set the items in step 4 and 5 as
Copy pictures
shown below.
Copy video (MPEG2)
Copying Direction
ENTER
Source: SD card
Mode
Content Type: Video
≥MPEG2 moving pictures on an SD card are automatically
registered on the copy list.
≥If there are no MPEG2 moving pictures on an SD card, "Copy
video (MPEG2)" is not displayed.
01/02
§
VIDEO
HDD
DVD-RAM
§
Conventionally recorded programs