Panasonic DMR-EH55S Operating Instructions Manual page 62

Changing the unit's settings
Tabs
Dynamic Range Compression [DVD-V] (Dolby Digital only)
Audio
Change the dynamic range for late night viewing.
Multi-channel TV Sound ( MTS )
Select whether to record the main or secondary (SAP) audio
type when:
–Recording or copying to a DVD-R, DVD-R DL, DVD-RW
(DVD-Video format), +R, +R DL and +RW.
–When "Enable High-Speed Mode" is set to "On".
–Recording or copying sound in LPCM. (➡ below, Audio for
XP Recording).
Digital Audio Output
Change the settings when you have connected equipment through this unit's DIGITAL AUDIO OUT terminal (➡ 18).
≥Press [ENTER] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96
kHz or 88.2 kHz.
≥Signals are converted to 48 kHz or 44.1 kHz despite the
settings across if the signals have a sampling frequency
of over 96 kHz or 88.2 kHz, or the disc has copy
protection.
Dolby Digital Select how to output the signal. If
DTS
Audio for XP Recording
Choose the audio type when recording or copying with XP
mode.
Select Audio Channel for DV Input
You can select the kind of audio when recording from the unit's
DV terminal (➡ 53).
Display Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for these menus and on-screen
messages.
Blue Background
Select "Off" if you do not want to have the unit show the blue
background when reception is weak.
FL Display
Changes the brightness of the unit's display.
TV TV Type (➡ 23)
Set to match the type of television connected.
Screen
RQT8365
62
Menus
"Bitstream" is selected, the connected
equipment decodes the signal.
If "PCM" is selected, this unit decodes the
signal and output it as 2 channel.
[Note]
Not making the proper settings may result
in noise, or some trouble for digital
recording.
Options (Underlined items are the factory presets.)
≥On ≥Off
≥Main ≥Secondary Audio Program (SAP)
You cannot select the audio on this unit when recording from an
external source, such as when copying from a video cassette
recorder (except from DV equipment connected to this unit's DV
input terminal). Select on the video cassette recorder, cable box
or satellite receiver.
≥On:
Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process
signals with sampling frequency of 96 kHz or 88.2
kHz.)
≥Off:
Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
≥Bitstream: When connecting to equipment displaying the
Dolby Digital logo.
≥PCM:
When connecting to equipment not displaying the
Dolby Digital logo.
≥Bitstream: When connecting to equipment displaying the DTS
logo.
≥PCM:
When connecting to equipment not displaying the
DTS logo.
≥Dolby Digital (➡ 76)
≥LPCM (➡ 76)
–The picture quality of LPCM recordings may be lower than
that of normal XP mode recordings.
–The audio recording becomes Dolby Digital even if you
selected LPCM when using a recording mode other than XP.
–When recording a MTS broadcast, select the type of audio in
advance from "Multi-channel TV Sound ( MTS )" (➡ above).
≥Stereo 1: Records audio (L1, R1).
≥Stereo 2: Records added audio such as narration (L2, R2)
subsequent to original recording.
≥Mix:
Records both Stereo 1 and Stereo 2.
[-R] [-RW‹V›] [+R] [+RW]
When recording a MTS broadcast, select the type of audio in
advance from "Multi-channel TV Sound ( MTS )" (➡ above).
≥Automatic ≥Off
≥English ≥Español ≥Français
–Only English is displayed in the TV Guide On Screen
system regardless of the settings. Other languages cannot
be displayed.
≥On ≥Off
≥Bright ≥Dim
≥Automatic:
The display turns dark during play, and reappears
momentarily if a button is pressed. When the unit is turned off
all displays disappear. While using this mode the standby
power consumption can be reduced.
4:3 TV
≥Aspect 4:3 & 480i ≥Aspect 4:3 & 480p
16:9 Aspect ( Widescreen TV )
≥Aspect 16:9 & 480i ≥Aspect 16:9 & 480p
TM