Setting The Channels And Clock - Panasonic DMR-EZ485VK Operating Instructions Manual

Setting the Channels and Clock

Preparation:
 Turn on the TV and select the appropriate video input
to suit the connections to the unit. (Example: AV
input, CH3 or CH4)
 These are the first settings you make upon buying
the unit. You don't need to make these settings again.
to turn the unit on.
DVD/VHS
POWER "HELLO" appears on the unit's display.
When this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 3 via an HDMI cable (
it acquires the setting information from the TV. When the
Quick Start Setting screen appears (
When this unit is connected to a TV via an HDMI cable, this step is not required.
to select an RF output channel number.
TRACKING/V-LOCK
 Connection (without HDMI cable or Audio/Video cable): While
viewing the unit's front display, select "CH3" or "CH4". If the
CH
selection is appropriate, then the step 3 screen will appear.
 Connection (with Audio/Video cable): While viewing the
unit's front display, select "OFF".
Language:
,  to select, then
When the Quick Start Setting screen
appears after this step (
TV Aspect Ratio:
,  to select "4:3 TV" or "16:9
Widescreen TV", then
 When connecting to a 4:3 standard aspect TV:
Select "4:3 TV".
 When connecting to a 16:9 widescreen TV:
Select "16:9 Widescreen TV".
Quick Start Function:
,  to select "On" or "Off",
then
OK
Automatic Clock and
Channel Settings:
,  to select "Yes" or
"No", then
 When connecting the cable from the wall (cable TV or
antenna) to the unit's RF IN: Select "Yes".
The unit then displays the source selection screen (
 When not connecting the cable from the wall (cable TV or
antenna) to the unit's RF IN: Select "No".
The unit then displays "Set Clock Manually" screen (
12
Manual Clock Setting).
RQT9056
OK
14, Step 1)
OK
The unit can be turned on faster, in about
(See Operation Instructions for details)
Automatic Clock and Channel Settings
Example: Antenna, Cable TV or Cable Box connected to the
OK
11),
14, Step 1)
Select Language
Seleccione el idioma
Sélection de langue
English
Español
Français
Press OK
Aspect Ratio Selection
Select TV type and press OK.
(Please refer to Operation Instruction
for details)
4:3 TV
16:9 Widescreen TV
Quick Start Setting
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
Turn Quick Start on ?
On
Off
Does this unit get its TV signal via RF IN?
unit's RF IN.
Yes
No
13).
13,
DVD/VHS
POWER
POWER
DRIVE
CH
TV/VIDEO
SELECT
TRACKING/V-LOCK
3
1 2
4 5 6
INPUT SELECT
8 9
7
FAVORITE
0
DELETE
RESET SLOW/SEARCH
SKIP/INDEX REW
STOP PAUSE PLAY
CM SKIP
TIME SLIP / / JET REW
OK
SUB MENU
CREATE
AUDIO DISPLAY VCR/TV
CHAPTER
A B
REC REC MODE F Rec STATUS
Tips
 "Quick Start" function (
58)
If you set Quick Start to on, you
can start recording to DVD-RAM
about 1 second after you press
[ DVD/VHS POWER] to turn the
unit on and then sequentially press
[ REC].
The following happens when you have
selected "On".
– Power consumption in standby mode
increases because power is supplied
to the unit.
To return to the previous screen
Press [RETURN].
VOL
CH
FF
RETURN