Timer Setting (Kitchen Timer/Standing Time/Delay Time) - Panasonic NN-SM332W Operating Instruction And Cook Book

Operation
Timer Setting
(Kitchen Timer/Standing Time/Delay Time)
This feature allows you to program standing Time after cooking is completed and to program the oven as a minute or 10 sec-
onds timer or program delay start.
To use as a Kitchen Timer: Example: To count 5 minutes
1. Press.
To Set Standing Time: Example: To stand for 5 minutes after cooking (3 mins. at Medium)
1. Press 3 times.
Set the desired cook-
ing program. (See
page 8 for directions.)
To Set Delay Time: Example: To start cooking 5 minutes later (3 mins. at Medium)
5 times
1. Press. 2. Press 5 times.
Set desired amount of
delay time.
(Up to 99 minutes and
50 seconds.)
Notes:
1. If oven door is opened while Standing Time, Delay Time or Kitchen Timer has been set, the time in the display window will
continue to count down.
2. Delay Time and Standing Time can not be programmed before any Auto control function. This is to prevent the standing tem-
perature of the food from rising before defrosting or cooking begins. A change in the starting temperature could cause in
accurate results.
3. When using Standing Time or Delay Time, it's up to 2 Micro Power stages.
342W/M)
(NN-ST340W)
5 times
2. Set desired amount of time.
(Up to 99 minutes and 50 seconds.)
3 times
2. Press 3 times. 3. Press.
3. Press 3 times.
Set the desired cooking
program. (See page 8
for directions.)
- Eng-14 -
(Continued)
3. Press.
Time counts down without
operating oven.
5 times
4. Press 5 times. 5. Press.
Set desired amount Cooking starts.
of standing time. After cooking,
(Up to 99 minutes standing time
and 50 seconds.) will count down
without operat-
ing oven.
3 times
4. Press 3 times. 5. Press.
Delayed time
counts down.
After delay
time, the cook-
ing will start.