Install A Bale Clasp Sfp Or Sfp+ Module - Cisco N540-FH-CSR-SYS Install Manual

Install the Device

Install a Bale Clasp SFP or SFP+ Module

Figure 21: Bale Clasp SFP or SFP+ Module
Install a Bale Clasp SFP or SFP+ Module
To install this type of SFP or SFP+ module:
1. Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
2. Close the bale clasp before inserting the SFP module.
3. Line up the SFP module with the port and slide it into the port. (See the figure below.)
Figure 22: Installing a Bale Clasp SFP Module into a Port
Install the Device
20