Cisco N540-FH-CSR-SYS Install Manual page 29

Install the Device
Ground the Device
Figure 31: Installing 23 inch Rack-Mount Brackets in the Middle with Cable Management Attached in Front Position Bracket
Ground the Device
Before you begin this task, ensure that you have read and understood the safety warnings in the Preventing
ESD Damage section of the Safety Warnings handout.
Before you connect the power or turn on the power to the device, you must provide an adequate device ground
(earth) connection to your device.
This section describes how to ground the device. The grounding lug location is on the back panel of the device.
1. Verify that the ground cable is connected to the top of the rack and according to local site practice.
Install the Device
29