JVC KW-R950BT Instruction Manual page 37

Specifications
Band
Frequency
Level
Q
HPF Frequency
Level
Q
LPF Frequency
Level
Q
Preout Level/Load
Preout Impedance
Operating Voltage
Installation Size (W × H × D)
Net Weight (includes Trimplate)
Subject to change without notice.
13 Band
62.5/ 100/ 160/ 250/ 400/ 630/ 1k/ 1.6k/ 2.5k/
4k/ 6.3k/ 10k/ 16k Hz
-09 — +09 (-9 dB — +9 dB)
1.35/ 1.5/ 2.0
THROUGH/ 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/
150/ 180/ 220/ 250 Hz
-6/ -12/ -18/ -24 dB/Oct.
-8/ -7/ -6/ -5/ -4/ -3/ -2/ -1/ 0 dB
THROUGH/ 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/
150/ 180/ 220/ 250 Hz
-6/ -12/ -18/ -24 dB/Oct.
-8/ -7/ -6/ -5/ -4/ -3/ -2/ -1/ 0 dB
3 500 mV/10 kΩ
≤ 600 Ω
12 V DC car battery
178 mm × 100 mm × 156 mm
1.4 kg
• Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States
and/or other countries.
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of
such technology outside of this product is prohibited without a license from Microsoft.
• Use of the Made for Apple badge means that an accessory has been designed to connect specifically
to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this accessory with an Apple product
may affect wireless performance.
• Apple, iPhone, iPod, iPod touch, and iTunes are trademarks of Apple Inc., registered in the U.S. and
other countries.
• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under
license.
• Android is a trademark of Google LLC.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names
are those of their respective owners.
The marking of products using lasers
The label is attached to the chassis/case and says that the component uses laser beams that have been
classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no
danger of hazardous radiation outside the unit.
37
ENGLISH