Audio Settings - JVC KW-R950BT Instruction Manual

Audio Settings

Select a preset equalizer directly
Press EQ-BASS repeatedly.
(or)
Press EQ-BASS , then turn the volume knob within 5 seconds.
Preset equalizer:
[FLAT]/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK] (default)/[HIP HOP]/[JAZZ]/[POP]/
[R&B]/[USER]/[CLASSICAL]
• Drive equalizer ([DRVN 3]/[DRVN 2]/[DRVN 1]) boosts specific frequencies in
the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
Store your own sound settings
1 Press and hold EQ-BASS to enter [EASY EQ] setting.
2
Turn the volume knob to select an item, then press the knob.
Refer to [EASY EQ] for setting and the result is stored to [USER].
• To return to the previous setting item, press
• To exit, press EQ-BASS.
20
ENGLISH
Other settings
1 Press and hold
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
To return to the previous setting item, press
[EQ SETTING]
[PRESET EQ]
[EASY EQ]
*1, *2: (see page 21)
.
MENU.
MENU to exit.
Selects a preset equalizer suitable to the music genre.
• Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].
[FLAT]/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/[JAZZ]/
[POP]/[R&B]/[USER]/[CLASSICAL]
Adjusts your own sound settings.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [PRO EQ].
[SUB.W SP]*1*2: [00] to [+06]
[SUB.W]*1: [–50] to [+10]
[BASS]: [LVL–09] to [LVL+09]
[MID]: [LVL–09] to [LVL+09]
[TRE]: [LVL–09] to [LVL+09]
.
Default: [XX]
(Default: [+03]
[00]
[LVL+01]
[LVL–06]
[LVL+03])