The External Monitor Is Blank Or The Image Is Unstable; The Notebook Cannot Be Started - Fujitsu Siemens Computers AMILO Xa 1526 Easy Manual

Troubleshooting and tips
Cause
Screen output is set to the notebook's LCD
screen
The external monitor's power cable or data cable
is not connected properly.

The external monitor is blank or the image is unstable

Screen Screen
Cause
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.

The notebook cannot be started

Notebook
Cause
The battery is not installed correctly.
62
Troubleshooting
► Press the key combination
(switch screen output).
► Switch off the external monitor and the
notebook.
► Check whether the power cable is plugged
properly into the external monitor and into
the power socket.
► Check whether the data cable is properly
connected to the notebook and the external
monitor (if it is plugged in with a connector).
► Switch on the external monitor and the
notebook.
Troubleshooting
► End the application program under Windows
by pressing
Alt
to occur after ending the programme, switch
over to the notebook's internal LCD screen
by pressing
Fn
following setting:
► Select the correct monitor or set the correct
screen resolution.
• Set the screen resolution: Select the
required screen resolution under Start –
Control Panel – Appearance and Themes -
Settings – Screen Resolution.
• Select monitor: Select the right monitor
under Start – Control Panel – Appearance
and Themes – Display – Settings – Advanced –
Monitor.
Troubleshooting
► Switch the notebook off.
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
Fn + F3
+ . If the fault continues
F4
+ . Change the
F3
10600718746, edition 1