Yaesu FTM-200DE Instruction Manual page 55

y 99 VOICE ALERT
Voice alert function setting.
Setting Item: VOICE ALERT: NORMAL / TONE SQL / DCS / RX-TSQL / RX-DCS
TONE SQL:
DCS:
Default: VOICE ALERT: NORMAL
TONE SQL:
DCS:
Explanation:
This is an audio notification function that will announce the presence of other stations
which can communicate via voice communications.
VOICE ALERT: Set the operation of the voice alert function.
NORMAL:
TONE SQL: A tone squelch will be used for sending and receiving voice
DCS:
RX-TSQL:
RX-DCS:
TONE SQL: Set the tone frequency used for the voice alert function.
DCS: Set the DCS code used for the voice alert function.
y 100 STATION LIST
Displaying beacons in the APRS STATION LIST
Rotate the DIAL knob to select the station to display the details, and press the DIAL knob.
For details, refer to "Displaying beacons in the APRS STATION LIST detail screen" on
page 8.
y 101 MESSAGE LIST
Displaying messages in the APRS MESSAGE LIST
On the message list screen, rotate the DIAL knob to select a message and press the
DIAL knob to check the contents of the sent / received message on the details screen or
reply.
For details, refer to "Description of the APRS MESSAGE LIST screen and operations" on
page 28.
88.5Hz to 254.1Hz
023 to 754
100.0Hz
023
The voice alert function will be turned off.
signals. A tone signal will also be appended when sending
APRS data.
DCS will be used in sending and receiving voice signals.
The DCS code will also be appended when sending APRS
data.
Although a tone squelch is used in sending and receiving
voice signals, a tone signal is not appended when sending
APRS data.
Although DCS is used in sending and receiving voice
signals, the DCS code is not appended when sending
APRS data.
54