Yaesu FTM-200DE Instruction Manual page 35

y Use fixed text to write a message
A character string registered in advance can be appended to a message text.
Refer to "Registering a standard message" for the registration method.
1
Follow Steps 1 - 6 in "Creating and sending messages"
(page 33).
2
Press the [P1] key on the microphone (SSM-85D).
3
Press the [UP] or [DWN] key to select a standard message number (1 to 8), then press
the same number key on the microphone.
• The selected fixed text will be entered.
• Repeat these steps to continue selecting standard messages.
Reference Characters can also be added to or deleted from a selected standard
message. Characters can also be added before or after a standard
message.
3
Press the [F menu] key.
4
Rotate the DIAL knob to select the [M-TX], then press the DIAL knob.
The message will be sent and the display will return to the frequency screen.
y Registering a standard message
8 standard messages containing a maximum of 16 characters each can be registered in
this device.
1
Press and hold the [F menu] key → [72 APRS MSG TEXT] → Press the DIAL knob.
2
Rotate the DIAL knob to select the message number to register and press the DIAL
knob.
A screen for editing the fixed text message will be displayed.
3
Entering a fixed text message.
Refer to "Text input screen" (FTM-200DR/DE Operating Manual) on how to enter a
fixed text message.
A maximum of up to 16 characters can be entered.
4
Press and hold the DIAL knob.
The fixed text message will be registered.
5
Press the [DISP] key or press the PTT switch to return to the operating screen.
34