Yaesu FTM-200DE Instruction Manual page 19

y Explanation of the detail screen display in a G (Raw GPS) APRS STATION LIST
and description of operations
Rotate the DIAL knob in the APRS STATION LIST screen to select the "G" (Raw GPS)
station and press the DIAL knob to display the G (Raw GPS) detailed screen.
Number:
The number of received beacon (up to a maximum of 100).
Character:
The station list characters will be displayed.
Compass:
The direction of the partner station as seen from your own station will be displayed.
Callsign:
The received station callsign will be displayed.
Partner station information:
Raw GPS (Raw NMEA data) information will be displayed.
Distance:
Distance to the received station will be displayed.
Date:
The date the beacon was received (MM/DD) will be displayed.
Time:
The time the beacon was received (HH:MM) will be displayed.
Altitude:
The altitude of the partner station will be displayed.
Latitude:
The N (north latitude) or S (south latitude) of the current position will be displayed (DDMM.MM or DDMMSS).
Longitude:
The E (east longitude) or W (west longitude) of the current position will be displayed (DDMM.MM or
DDMMSS).
•Operation
Scroll the screen
Select the beacon to display
Send a message to a beacon station
Display the packet data (raw data)
Manual transmission of a beacon (page 23)
Delete a selected beacon station from the display (page 22)
Setup menu (page 37)
① ② ③ ④ ⑤ ⑥
GGA/GLL 02/22
15114km 15:36
Alt
N 36 ̊ 43 . 17 �
E 139 ̊ 47 . 35 �
18
⑦
⑧
240m ⑨
⑩
⑪
Rotate the DIAL knob.
Press the DIAL knob to display
then rotate the DIAL knob.
[F menu] → [REPLY]
[F menu] → [RAW]
[F menu] → [BCN-TX]
[F menu] → [DEL]
Press and hold the [F menu] key.
,