Answering Calls; Useful Features During A Call - Panasonic 2-LINE KX-TG9551 Series Operating Instructions Manual

Making/Answering Calls Using the Base Unit

Answering calls

1
Press MZN when the unit rings.
R You can also answer the cellular call by
pressing the corresponding cellular line key
(MCELL 1N to MCELL 4N).
R The called landline is automatically
selected. To change the line selection
mode, see page 17.
R You can also answer the landline call by
pressing MLINE 1N or MLINE 2N.
2
Speak into the microphone.
3
When you finish talking, press MZN.
Temporary ringer off: You can turn the ringer off
temporarily by pressing M N.
Adjusting the base unit ringer volume
Press MDN or MCN repeatedly to select the desired
volume while ringing.

Useful features during a call

Hold
1
Press MHOLDN during an outside call.
R During hold, the caller will hear music. For
canceling music, see page 42.
2
To release hold on the cellular line:
Press the corresponding cellular line key
(MCELL 1N to MCELL 4N).
R A handset user can take the call: MCELLN
a MbN: Select the corresponding cellular
phone. a MSELECTN
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
To release hold on the landline:
Press MLINE 1N or MLINE 2N.
Note:
R While a landline call is on hold, the
corresponding line indicators flash.
R After holding for 10 minutes, the call is
disconnected.
28 For assistance, please visit http://shop.panasonic.com/support
KX-TG954x_955x_OI(en)_0507_ver432.pdf 28
Mute
1
Press MMUTEN during a call.
2
To return to the call, press MMUTEN.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Flash for landline calls
MFLASHN allows you to use the special features of
your host PBX such as transferring an extension
call, or accessing optional telephone services.
Note:
R To change the flash time, see page 42.
For call waiting or Call Waiting Caller
ID service users
To use call waiting or Call Waiting Caller ID, you
must first subscribe with your phone service
provider.
This feature allows you to receive calls while you
are already talking on the phone. If you receive a
call while on the phone, you will hear a call waiting
tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd caller's
information is displayed on the unit that is in use
after you hear the call waiting tone.
1
Press MCALL WAITN to answer the 2nd call.
2
To switch between calls, press MCALL WAITN.
*1
Note:
R Please contact your phone service provider for
details and availability of this service in your
area.
Temporary tone dialing for landline
calls (for rotary/pulse service users)
Press * (TONE) before entering access numbers
which require tone dialing.
Call share
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line press the corresponding
cellular line key (MCELL 1N to MCELL 4N).
2018/05/07 14:00:42