Panasonic 2-LINE KX-TG9551 Series Operating Instructions Manual page 17

Program this setting using either the base unit or
one of the handsets.
Handset / Base unit
1
MMENUN#120
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Line selection mode for landline
The line selection mode determines which line is
selected when:
– you press M N/MZN on the handset (when
making/answering calls)
– you press MZN on the base unit (when making/
answering calls)
The following setting is available:
– "Auto" (default): When making a call, line 1 is
selected. If that line is unavailable, line 2 is
selected. When you call back using the caller
list (page 47) or while listening to a message
(page 56, 57), the indicated line is used.
When answering a call, the ringing line is
selected.
– "Line1": Line 1 is selected.
– "Line2": Line 2 is selected.
Handset / Base unit
1
MMENUN#250
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R You can select a line manually regardless of the
line selection mode by pressing ML1N/ML2N on
the handset or MLINE 1N/MLINE 2N on the base
unit.
For assistance, please visit http://shop.panasonic.com/support
KX-TG954x_955x_OI(en)_0507_ver432.pdf 17
Getting Started
17
2018/05/07 14:00:41