Table of Contents
Advertisement
Connecting the Projector
Do not turn on the power until connection is complete.
0
The connection procedures differ according to the device used. For details, please refer to the instruction manual
0
of the device to be connected.
This projector is used for projecting images. To output the audio of connected devices, please connect a separate
0
audio output device, such as an amplifier or speaker.
The images may not be displayed depending on the devices and cables to be connected.
0
Use only HDMI cables (sold separately) that are HDMI-certified.
Some cables cannot be connected to this unit due to the size of their connector cover.
0
Connecting to the HDMI Input Terminal (Digital Input)
Connecting via HDMI cable
This Unit
To [HDMI 1] or [HDMI 2] input terminal
Or both [HDMI1] and [HDMI2]
.
If noise occurs, move the laptop away from this unit.
0
For a transmission bandwidth in compliance with the HDMI standard, a 340 MHz cable is recommended.
0
If the video is not displayed, try to reduce the length of the cable.
0
Connecting via HDMI-DVI conversion cable
This Unit
To [HDMI 1] or [HDMI 2] input terminal
Or both [HDMI1] and [HDMI2]
HDMI-DVI Conversion Cable (Sold Separately)
.
If noise occurs, move the desktop PC away from this unit.
0
If the video is not displayed, try to reduce the length of the cable.
0
HDMI Cable (Sold Separately)
Laptop, etc.
HDMI Output Terminal
Desktop PC, etc.
DVI Output Terminal
19
Advertisement
Table of Contents
