Table of Contents
Advertisement
As shown in Figure 7, make sure that the lamp attachment is coupled with the clasp
5
of the lamp unit
When replacing the lamp, please remove the lamp attachment and put it to the new lamp.
0
Attachment of the installation verification sticker
After replacing the lamp, attach the "installation verification sticker" on the lamp cover
1
Attach the installation verification sticker at the bottom right of the lamp cover.
0
.
Area B
90 °
45 °
Area A
46
.
In the case of installation in the "Area A"
Installation Verification Sticker "UPPER45° -DOWN90°"
30 °
In the case of installation in the "Area B"
Installation Verification Sticker "UPPER45° -90°&&REVERSE"
Area B
When the lamp attachment is removed, peel off the attached verification
sticker and keep it for further use.
-30 °
Figure 7
Installation verification sticker
Advertisement
Table of Contents
