Connecting The Projector; Connecting To The Hdmi Input Terminal (Digital Input) - JVC DLA-X9500 Instructions Manual

Connecting the Projector

Do not turn on the power until connection is complete.
0
The connection procedures differ according to the device used. For details, please refer to the instruction manual
0
of the device to be connected.
This projector is used for projecting images. To output the audio of connected devices, please connect a separate
0
audio output device, such as an amplifier or speaker.
The images may not be displayed depending on the devices and cables to be connected.
0
A high speed HDMI cable (sold separately) that is HDMI-certified is recommended.
When using a standard cable, you are recommended to set the resolution of the equipment transmitting the video
to 1080i or lower.
Also, please refer to "HDMI2 EDID"P. 48.
0
Some cables cannot be connected to this unit due to the size of their connector cover.
0

Connecting to the HDMI Input Terminal (Digital Input)

Connecting via HDMI cable
This Unit
To [HDMI 1] or [HDMI 2] input
terminal
.
If noise occurs, move the laptop away from this unit.
0
Connecting through an AV amplifier
This Unit
To [HDMI 1] or [HDMI 2] input
terminal
.
If the source device is connected to the projector through an intermediate device such as an AV amplifier or divider,
0
the video image may not appear depending on the specifications of the intermediate device.
In this case, connect the source device directly to the projector, and check whether the video image is displayed.
18
HDMI Cable (Sold Separately)
HDMI Cable (Sold Separately)
BD/DVD Recorder, etc.
HDMI Output Terminal
BD/DVD Recorder, etc.
HDMI Cable
(Sold Separately)
AV Amplifier
Laptop, etc.
Speakers
Speaker Cable
(Sold Separately)