Sony HDCU2080 Operation Manual page 28

CCU CONFIGURATION menu
CCU
CONFIGURATION
Page name
Page No.
<COLOR BAR>
C01
<BAR CHARACTER>
C02
<MONITOR 1>
C03
28
Setup Menu
Item Settings
HD-BAR
SEL BAR 16:9 (100%), BAR 16:9
(75%), SMPTE 16:9 (BLACK),
SMPTE 16:9 (–I/Q), BAR 4:3
(100%), BAR 4:3 (75%), SMPTE
4:3 (BLACK), SMPTE 4:3 (–I/Q),
MF-ARIB (75%), MF-ARIB (100%),
MF-ARIB (+I), MF-SMPTE (–I,Q),
MF-SMPTE (75%,Q), MF-SMPTE
(100%,Q), MF-SMPTE (+I,Q), HD-
CUSTOM, SDI CHECK FIELD, Y-
RAMP, Y/C-RAMP, HD-CUSTOM2
MF CB MODIFY, EVEN
SLOPE WIDE, NARROW
SD-BAR SMPTE, EIA, EBU, 95%,
PAL100%, Y/C-RAMP, Y-RAMP
DSB, ENB
BAR-CHARA ON, OFF
GRAY ON, OFF
BAR CHARACTER
ALL CLEAR
CHARACTER
WHITE-LEVEL 0.0 to 107.0% 71.5
BLACK-LEVEL 0.0 to 107.0%
PIX CHARACTER
WHITE-LEVEL 0.0 to 107.0%, 75.0
BLACK-LEVEL 0.0 to 107.0%
Description
Sets an HD output color bar.
Sets a multi-format color bar.
Sets the chroma band for a color bar.
Sets SD output for a color bar.
DSB: Down convert and display the HD color bar.
ENB: Display the set SD color bar.
Turns the signal for characters superimposed on a
color bar ON/OFF.
ON: Gray screen output when camera power supply
is off.
OFF: Color bar signal output when camera power
supply is off.
Sets strings 1 to 12 that are superimposed on the
color bar signal.
Execute to clear all character strings. (Execute via
ENTER.)
Sets the MONITOR output bar character.
Sets the MONITOR output bar character level.
Sets the MONITOR output bar character border
black level.
Sets the PIX output bar character. (Displayed only
when HKCU1001/1003 is installed.)
Sets the PIX output bar character level.
Sets the PIX output bar character border black level.