Table of Contents
Advertisement
SYSTEM OPERATION
Page name
Item
Page No.
<RETURN FORMAT>
RET1
S06
RET2
RET3
RET4
AUTO SCAN
LINK TO MAIN
<RETURN SETUP>
FRAME SYNCHRO
S07
SD-RETURN
<CCU VIDEO>
VBS-CHROMA
S08
MONO-COLOR
<3D SETTINGS>
3D MODE
S09
3D OUTPUT
3D MONITOR
CHANNEL ID
Settings
1080/50I (PsF), 625/50I (PsF), PAL
SQUEEZE, EDGE CROP, LETTER
BOX,
16:9, 15:9, 14:9, 13:9
Execute via EXEC.
MANUAL/AUTO
OFF, ON
MATRIX
OFF, ON
LB LINE
360, 364
ASPECT
MANUAL, AUTO
OFF, ON
OFF, ON
PHASE
0 to 358, 0
SATURATION
–99 to 99, 0
OFF, ON
3D MONITOR, RIGHT ONLY,
LEFT ONLY
SPLIT SCREEN, SIDE BY SIDE,
ANAGLYPH, 50% MIX,
DIFFERENCE, DIFF Y ONLY,
MIRROR, CROP SPLIT, V SPLIT,
CHECKER BOARD, LINE BY LINE
POSITION
–99 to 99, 0
MIX CHROMA
ON, OFF
DIFF MODE
L-R, R-L
V SPLIT MODE
L/R, R/L
BORDER LINE
OFF, ON
(OFF), (ON)
Description
Sets the return signal input format.
Sets input format, aspect ratio, and letterbox mode.
Automatically detects the return signal input format,
and then executes.
Note
If the automatically detected result is invalid, the
previous setting flashes for 5 seconds, and then the
previous setting is maintained.
Sets the mode for linking the return signal to this
signal.
Set the FRAME SYNCHRO function for the return
signal to on/off.
Turn the HD matrix to the SD return signal on/off.
Set the effective line setting for letterbox.
Sets the auto-linking function for this unit's aspect
setting.
Turns the VBS output signal's cross signal on/off.
Sets the MONO COLOR function on/off.
Adjusts the color phase for the MONO COLOR
function.
Adjusts the color saturation for the MONO COLOR
function.
Turns the 3D Mode setting ON/OFF. (Available only
with the HDFA-200 expansion.)
Sets 3D Monitor output.
Displays the format.
Sets the WIPE division ratio and MIX mix ratio.
(Displayed when 3D MODE is set to ON.)
Selects whether to display chroma information when
MIX is activated.
Switches to the difference image calculation
operation.
Switches the left and right sides when splitting the
display.
Selects whether or not to display the boundary line
when splitting the display.
Selects whether to display the Channel ID with this
line's output.
27
Setup Menu
Advertisement
Table of Contents
