Mower Deck Installation (continued)
Deck Drive Belt Replacement
Deck Drive Belt Removal
Mower Deck: Service and Repairs
g344399
8. Install the floor pan onto the machine.
g344398
9. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
10. Verify proper function of the unit.
1. Park the machine on a level surface and disengage the PTO. Stop the engine,
wait for all moving parts to stop, and remove key. Engage the parking brake.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
3. Place the height of cut pin into the third hole to lock the mower deck in the
lowest height-of-cut position.
Figure 76
Figure 77
Page 6–10
TITAN® Max Service Manual
3442-428 Rev A