Starter Will Not Operate - Yamaha F80B Owner's Manual

1. Filter cup
2. Water detection switch lead
6. Drain the water in the filter cup by soaking
it up with a rag.
7. Firmly screw the filter cup onto the filter
housing. NOTICE: Be careful not to
twist the water detection switch lead
when screwing the filter cup onto the
filter housing.
8. Connect the water detection switch cou-
pler securely until a click is heard.
1. Water detection switch coupler
9. Fasten the water detection switch lead
with the plastic tie.
[ECM01970]
Trouble Recovery
1. Plastic tie
10. Install the top cowling.
11. Start the engine and make sure that the
water separator-alert indicator remains
off. Have a Yamaha dealer inspect the
outboard motor after returning to port.
EMU29542

Starter will not operate

If the starter mechanism does not operate
(the engine cannot be cranked with the start-
er), the engine can be started manually with
an emergency starter rope. However, the en-
gine cannot be started manually if the battery
voltage is low. If the battery is discharged to 9
volts or below, the electric fuel pump will not
operate.
EWM01022
WARNING
Use this procedure only in an emergen-
●
cy to return to the nearest port for re-
pairs.
When the emergency starter rope is
●
used to start the engine, the start-in-
gear protection device does not operate.
Make sure the remote control lever is in
91