Procedure For Tilting Down (Hydro Tilt Models); Procedure For Tilting Down (Power Trim And Tilt Models) - Yamaha F80B Owner's Manual

Operation
tilt switch " " (down) to retract the trim
rods. NOTICE: Make sure that the trim
rods retracts completely during moor-
ing. This protects the rods from ma-
rine growth and corrosion, which
could damage the power trim and tilt
mechanism.
[ECM00252]
EMU34480
Procedure for tilting down (hydro tilt
models)
1. Release the tilt lock lever.
2. Hold the rear of the top cowling with one
hand, tilt the outboard motor up slightly
and pull out the tilt support knob or return
the tilt support lever.
3. Slowly tilt the outboard motor down.
4. Place the tilt lock lever in the lock posi-
tion.
62
EMU33121
Procedure for tilting down (power trim
and tilt models)
1. Push the power trim and tilt switch "
(up) until the outboard motor is supported
by the tilt rod and the tilt support lever be-
comes free.
2. Release the tilt support lever.
3. Push the power trim and tilt switch "
(down) to lower the outboard motor to the
desired position.
UP
DN
DN
"
"
ZMU01936