Overheat Alert; Water Separator Alert - Yamaha F80B Owner's Manual

activated while the appropriate engine oil
quantity is maintained, consult your Yamaha
dealer.
ECM01601
NOTICE
Do not continue to run the engine if the
low oil pressure alert device has activated.
Serious engine damage will occur.
EMU36221

Overheat alert

If the engine temperature rises too high while
cruising, the overheat-alert indicator will start
to blink. The engine speed will automatically
decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for clog-
ging.
Instruments and indicators
ECM01592
NOTICE
Do not continue to run the engine if the
●
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
●
a alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU36150

Water separator alert

This indicator will blink if water has accumulat-
ed in the water separator (fuel filter) while
cruising. In such an event, stop the engine im-
mediately and see page 88 of this manual to
drain the water from the fuel filter. Get back to
the port soon and consult a Yamaha dealer
immediately.
ZMU05421
ZMU05422
ZMU05423
ZMU05424
35