Start-Up Checks - Yamaha F80B Owner's Manual

play, water detection alert, engine trouble
alert, and periodic maintenance notification. If
the cooling water pressure sensor is installed,
the unit can also show the cooling water pres-
sure display. However, even if the cooling wa-
ter pressure sensor is not installed, the
cooling water pressure display can be shown
by connecting an optional sensor to the unit.
For the optional sensor, consult your Yamaha
dealer. The tachometer unit is available in
round or square types. Check your tachome-
ter unit type.
1
1. Set button
2. Mode button
5
4
7
6
8
1. Tachometer
2. Trim meter
3. Multifunction display
4. Cooling water pressure
5. Cooling water/engine temperature
6. Water detection-alert indicator
7. Battery voltage
8. Oil pressure (4-stroke models)
2
ZMU05415
1
2
3
ZMU05416
Instruments and indicators
1
1. Set button
2. Mode button
3
6
1. Tachometer
2. Trim meter
3. Multifunction display
4. Water detection-alert indicator
5. Engine trouble alert/maintenance indicator
6. Cooling water pressure
7. Oil pressure (4-stroke models)
8. Cooling water/engine temperature
9. Battery voltage
EMU36190

Start-up checks

Place the remote control lever / gear shift le-
ver in neutral and turn the main switch to "
(on). After all the displays come on and the to-
tal hour display comes on, the gauge will
change to normal operation. If the buzzer
sounds and the water separator-alert indica-
tor blinks, consult your Yamaha dealer imme-
diately.
1 4 5 2
7 8 9
2
ZMU05417
ZMU05418
"
33