Trolling; Adjusting Trolling Speed; Stopping Engine; Procedure - Yamaha F80B Owner's Manual

The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle lever is moved back to idle. The
stopping distance varies depending on gross
weight, water surface conditions, and wind di-
rection.
EMU30880

Trolling

EMU30890

Adjusting trolling speed

The trolling speed on outboard motors
equipped with the variable trolling RPM
switches can be adjusted approximately 50
r/min with each press of a switch.
1. " " switch
2. " " switch
To increase the trolling speed, press the "
switch.
To decrease the trolling speed, press the "
switch.
TIP:
The trolling speed changes approximately
●
50 r/min each time a switch is pressed.
If the trolling speed has been adjusted, the
●
engine returns to the normal trolling speed
when the engine is stopped and restarted
or when the engine speed exceeds approx-
imately 3000 r/min.
EMU27821

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating at
high speed is not recommended.
EMU38651

Procedure

1. Push and hold the engine stop button or
turn the main switch to "
"
"
Operation
" (off).
55