Table of Contents
Advertisement
Display assembly
NOTE:
The display assembly includes a webcam, a microphone, and 2 wireless antenna transceivers
and cables.
Description
12.1-inch WXGA+ BrightView display assembly, Espresso Black
12.1-inch WXGA+ BrightView display assembly, Moonlight White
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Memory module (see
c.
WWAN module (see
d.
WLAN module (see
e.
Keyboard (see
f.
Top cover (see
g.
Fan (see
h.
System board (see
i.
Speaker assembly (see
Remove the display assembly:
1.
Open the computer display as far as possible.
CAUTION:
the display assembly can result in damage to the display assembly and other computer
components.
2.
Remove the two Phillips PM2.0×5.0 screws (1) from each hinge that secures the display assembly
to the computer. Each hinge also secures a grounding strap.
3.
Disconnect the display panel cable ground loops (2).
68
Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
Memory module on page
WWAN module on page
WLAN module on page
Keyboard on page
Top cover on page
Fan on page
55)
System board on page
Speaker assembly on page
Support the display assembly when removing the following screws. Failure to support
39).
40)
43)
45)
47)
50)
53)
59)
63)
Spare part number
506769-001
517587-001
Advertisement
Table of Contents
