Table of Contents
Advertisement
Speaker assembly
Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Memory module (see
c.
WWAN module (see
d.
WLAN module (see
e.
Keyboard (see
f.
Top cover (see
g.
Fan (see
h.
System board (see
Remove the speaker assembly:
1.
Remove the two PM2.5x4.0 screws (1) that secure the speaker to the base enclosure.
Battery on page
Hard drive on page
Memory module on page
WWAN module on page
WLAN module on page
Keyboard on page
Top cover on page
Fan on page
55)
System board on page
39).
40)
43)
45)
47)
50)
53)
59)
Component replacement procedures
Spare part number
517754-001
63
Advertisement
Table of Contents
