Vacuum Circuit-Breaker - Siemens 8DA10 Series Installation And Operating Instructions Manual

Description
Circuit-breaker panel,
disconnector panel
Data of the switchgear panels (circuit-breaker panel, disconnector panel, bus sectionalizer, cable connection panel, metering panel)
Rated voltage U
r
1
Rated normal current I
r
Rated short-time withstand current I
50 Hz
60 Hz
Rated short-circuit breaking current I
Electrical endurance of vacuum circuit-
breakers
Filling pressure (pressure values at
20 °C)
1
Maximum permissible normal current dependent on ambient air temperature
2
1600 A not available for bus sectionalizer, cable connection panel, metering panel
3
3150 A with forced ventilation
Operating times
Number of operating
cycles
Closing time
Opening time
Arcing time
Break time
32/214
t = 3 s
k k
Rated peak withstand current I
Rated short-circuit making current I
Rated peak withstand current I
Rated short-circuit making current I
sc
at rated normal current
at rated short-circuit breaking current
Rated filling level p (absolute) for feeders
re
Minimum functional level p
17.2

Vacuum circuit-breaker

Closing time
Opening time
Arcing time at 50 Hz
at 60 Hz
Break time
at 50 Hz
Dead time
Total charging time
Currents
Rated normal current
Short-circuit breaking current
The interval of time between the initiation (command) of the closing operation and
the instant when the contacts touch in all poles.
The interval of time between the initiation (command) of the opening operation and
the instant when the contacts separate in all poles.
The interval of time from the first initiation of an arc and the instant of final arc extinction in
all poles.
The interval of time between the initiation (command) of the opening operation and
the instant of final arc extinction in the last-pole-to-clear (=opening time and arcing time).
Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9
kV
A
A
A
A
A
A
up to kA
up to kA
p
up to kA
ma
up to kA
p
up to kA
ma
up to kA
Standard
Option
kPa
(absolute) kPa
me
Closing solenoid
1st shunt release
2nd shunt release
Undervoltage release
1st shunt release
2nd shunt release
Undervoltage release
Number of Maintenanc
operating cycles e
10000 without
30000 (option) with
50 without
12 24 36
1250
2
1600
2000
2500
2750
3
3150
40
100
100
104
104
40
10,000 operating cycles
30,000 operating cycles
50 breaking operations
70/120
50/100
<95 ms
<65 ms
<55 ms
<55 ms
<15 ms
<12 ms
<80 ms
<70 ms
<70 ms
300 ms
<15 s
40.5