Menu Options And Default Settings - Canon XL H1S Instruction Manual

Additional Information

Menu Options and Default Settings

In the following tables, default settings are shown in boldface and the availability of menu settings in
different operating modes is indicated with the following icons:
: CAMERA MENU (
: VCR/PLAY MENU (
: CARD CAMERA MENU (
: CARD PLAY MENU (
SIGNAL SETUP
Menu item (Submenu item and) Setting options
TIME CODE FRAME SETTNG
COUNT-UP
START VALUE
HDV/DV IN
2
GENLCK ADJST 0000 (-1023 to 1023)
PLAYBACK STD AUTO, HDV, DV
COMP.OUT 480i, 1080i/480i
2
SDI OUTPUT ON(OSD), ON, OFF
2
SDI SPEC. AUTO, SD LOCKED
AV DV ON, OFF
HD DOWN-CONV ON, OFF
LETTERBOX ON, OFF
1
Not available when recording in standard definition (SD) with the frame rate set to 24F.
2
only.
[HD DOWN-CONV]: Selects whether to down-convert the video signal output from the HDV/DV terminal
while playing back a tape recorded in HDV standard.
Standard of the tape
[HD DOWN-CONV]
being played back
HDV
DV
The down-converted output video signal will always be 60i, regardless of the frame rate of the original
recording.
Even if the audio was originally recorded using all 4 channels (with another camcorder), only channels
1 and 2 will be output.
dial set to one of the recording modes,
dial set to , / switch is set to
dial set to one of the recording modes,
dial set to , /
DROP, NON-DROP
REC-RUN, REC-RUN PS.,
1
FREE-RUN
00:00:00:00 (SET, RESET)
REGEN., COPY
Setting
[AUTO]
[ON] DV
[OFF] HDV
[ON] DV
[OFF] DV
/ switch set to
)
/ switch set to
switch set to )
–
–
–
– –
–
– –
– –
– –
– –
[PLAYBACK STD] Setting
[HDV]
DV
HDV
No output
No output
)
)
– 52
– 52
– 52
– 93
– 54
– 114
87
86
86
– 94
– 87
– 85
[DV]
No output
No output
DV
DV
133