Menu Options And Default Settings - Canon XH A1S Instruction Manual

Additional Information

Menu Options and Default Settings

In the following tables, default settings are shown in boldface and the availability of menu settings in
different operating modes is indicated with the following icons:
: CAMERA MENU (
: VCR/PLAY MENU (
: CARD CAMERA MENU (
: CARD PLAY MENU (
SIGNAL SETUP
Menu item
TIME CODE
2
GENLCK ADJST
SIGNAL STD
FRAME RATE
PLAYBACK STD
COMP.OUT
2
SDI OUTPUT
2
SDI SPEC.
UB OUT
AV DV
HD DOWN-CONV
LETTERBOX
1
Not available when recording in standard definition (SD) with the frame rate set to 24F.
2
only.
[HD DOWN-CONV]: Selects whether to down-convert the video signal output from the HDV/DV terminal
while playing back a tape recorded in HDV standard.
Standard of the tape
being played back
HDV
DV
The down-converted output video signal will always be 60i, regardless of the frame rate of the original
recording.
Even if the audio was originally recorded using all 4 channels (with another camcorder), only channels
1 and 2 will be output.
126
dial set to one of the recording modes,
dial set to ,
dial set to one of the recording modes,
dial set to
(Submenu item and) Setting options
FRAME SETTNG DROP, NON-DROP
COUNT-UP REC-RUN, REC-RUN PS.,
FREE-RUN
START VALUE 00:00:00:00 (SET, RESET)
HDV/DV IN REGEN., COPY
0000 (-1023 to 1023)
HD, SD16:9, SD4:3
60i, 30F, 24F
AUTO, HDV, DV
480i, 1080i/480i
ON(OSD), ON, OFF
AUTO, SD LOCKED
HD 24P 2:3, SET UB
ON, OFF
ON, OFF
ON, OFF
[HD DOWN-CONV]
Setting
[ON]
[OFF]
[ON]
[OFF]
/
/ switch set to
, / switch set to
1
–
–
–
–
–
[PLAYBACK STD] Setting
[AUTO]
DV
HDV
DV
DV
switch set to )
)
/ switch set to
)
–
–
–
–
–
– –
– –
–
–
–
–
–
[HDV]
DV
HDV
No output
No output
)
– 44
– 44
– 44
– 86
– 46
– 34
– 42
– 107
80
79
79
– 46
– 87
– 81
– 79
[DV]
No output
No output
DV
DV