Canon XL H1S Instruction Manual page 105

Resetting a Custom Function File
1. Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION]
submenu.
2. From the column on the left select the custom function file you want to reset.
3. From the bottom bar select [
4. Select [OK], press the SET button and close the menu.
Activating a Custom Function File
Even if you define a custom function file, as long as you do not activate it, the camcorder will function
according to default settings.
1. Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION]
submenu.
2. From the column on the left select the custom function file you want to activate.
3. From the bottom bar select [
4. Select [ACTIVE] and press the SET button.
will appear next to the custom function file currently activated.
Copying a Custom Function File to the Memory Card
1. Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION]
submenu.
2. From the column on the left select the custom function file you want to copy to the
memory card.
3. From the bottom bar select [
4. Select the destination file on the memory card [
5. Select [OK], press the SET button and close the menu.
When the operation is finished, "TASK COMPLETED" will appear on the screen.
Reading a Custom Function File from the Memory Card
1. Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION]
submenu.
2. From the column on the left select the custom function file to which you want to read
the settings from the memory card.
3. From the bottom bar select [
4. Select the source file on the memory card [
5. Select [OK], press the SET button and close the menu.
When the operation is finished, "TASK COMPLETED" will appear on the screen.
Custom function files saved with a Canon XH G1 or XH A1 cannot be used with this camcorder.
RESET].
APPLY THIS SET].
SAVE TO CARD].
1] - [
READ FROM CARD].
1 ] - [
3].
3 ].
105