Audio Setup - Canon XL H1S Instruction Manual

If you record in both SP and LP modes on the same tape, the playback picture may become
distorted, and the time code may not be written correctly.
If you play back on this camcorder, a tape that was recorded in LP mode with another digital device
or vice versa, the picture and sound may become distorted.

AUDIO SETUP

Menu item Setting options
AUD.M.SET CH
1/2
MIX BALANCE
DV AUDIO 16bit, 12bit
MONITOR SEL. NORMAL, LINE OUT
WIND SCREEN ON
MIC SENSIT. NORMAL, HIGH
XLR 1 TRIM +12dB, +6dB, 0dB, -6dB, -12dB
XLR 2 TRIM
OUTPUT LEVEL 1Vrms, 2Vrms
XLR ALC LINK LINK, SEP
AUD.LIMITER ON, OFF
1
Available only when recording in standard definition (SD).
[OUTPUT LEVEL]: Select the amplitude of the audio output signal.
CARD OPERATIONS
Menu item Setting options
ERASE ALL PRINT ORD NO, YES
ERASE ALL IMAGES NO, YES
INITIALIZE CANCEL, INITIALIZE, COMPL.INIT.
After opening the menu from the index screen:
PROTECT –
PRINT ORDER –
After pressing the SET button:
IMAGE ERASE CANCEL, ERASE
PROTECT OFF, ON
PRINT ORDER 0 COPIES
SLIDESHOW CANCEL, START
1
Available only when you press the SET button within the time set for the [CAMERA SETUP]
immediately after recording if it is set to [OFF]).
1/2 , CH 3/4 , MIX/FIXED, MIX/VAR.
3/4
, OFF
– –
– –
1
–
– –
–
–
–
–
–
– – –
– – –
– – –
– – –
– – –
1
– –
1
– –
– – –
– – –
[REVIEW] setting (or
– 59
– 90
– 57
– 90
– 57
– 57
– 59
– 90
– 59
– 59
132
129
131
130
132
129
130
132
127
135