Canon XL H1S Instruction Manual page 86

Connection to a High Definition Monitor or HDTV
Using the HD/SD SDI Terminal
1
Open the terminal cover
* If [SDI OUTPUT] is set to [OFF] (no embedded audio), the audio signal is separate from the SDI video
output signal
Activate the HD/SD SDI output and select the appropriate video output option (HD or SD).
1. Set the
2. Open the menu and select [SIGNAL SETUP]. Select [SDI OUTPUT] and set it to [ON] or
[ON(OSD)].
3. From the same [SIGNAL SETUP] submenu select [SDI SPEC.]. Select [AUTO] or
[SD LOCKED] to match the video output you wish to use.
4. Close the menu.
When [SDI OUTPUT] is set to [ON(OSD)],
be included in the video signal output from the SDI terminal.
When [SDI OUTPUT] is set to [ON(OSD)]:
The on-screen displays included in the video output signal are determined by the display level
selected with the EVF DISPLAY button (
etc.) are never included in the video signal output.
The [SIGNAL SETUP]
86
White
Red
BNC Cable (commercially available)
dial to .
[COMP.OUT] setting is not available.
Stereo Cable*
(supplied)
Signal flow
Signal flow
will appear on the screen and on-screen displays will
39). Markers (safety zone guide, level/grid markers,
INPUT
VIDEO
White
L
AUDIO
Red
R
S (S1)-VIDEO