Installation Site Environment - Toshiba V Series User Manual

Chapter 3 Handling and Precautions

3.2 Installation Site Environment

3
72
Avoid installing in the following environment:
(1) Where the ambient temperature is outside the range from 0(32
(2) Where relative humidity is outside the range from 20 to 90%.
(3) Where there is condensation due to sudden change in temperature.
(4) Where there is excessive shock.
(5) Where there is corrosive of flammable gas.
(6) Where there is excessive dust, salt, or iron.
(7) Where there is direct sunlight.
Follow the precautions described below for the installation of the board housing the
analog module:
(Take extra precaution because very weak voltage and current are involved.)
(1) Keep away from high voltage or power board as much as possible (at least 200 mm).
(2) If there is a high frequency equipment or facility, securely ground the housing board.
(3) If the channel base is shared with other boards, check that there is no leak current
from other boards or equipment.
o o o
F) to 55 C(131 F).
model 3000 Analog module User's Manual