Toshiba V Series User Manual page 44

Chapter 1 Module
1
32
Unipolar (0 to 5 V, 0 to 10 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA)
The range of digital input with respect to analog input is 0 to 4000 counts for full scale
input (0 to 5 V, 0 to 10 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA). A 0.4% (±16 counts)
margin is provided to compensate for fluctuation in input near full scale input.
15 14 13
D15 D14 D13 D12 D11 D10 D9
Digital value
Positive
Hex
integer
Value
0FB1H to 4017 to
exceeding
FFFFH 65535
upper limit
Upper limit 0FB0H 4016
Full scale 0FA0H 4000
Zero (lower
0000H 0
limit)
Analog output value per count
to
Upper limit
to
Upper limit
Supplementary
• When variable is used for digital value, the output will be the upper limit value if value
between -1 and -32768 is written.
• The values shown in the following table can be output as the lower limit of the analog output
by setting the analog output calibration value.
Output type
Analog output lower limit
12 11 10 9 8 7
D8 D7
Analog output value
DA364
0 to 5 V 0 to 10 V 1 to 5 V
5.020 V 10.040 V 5.016 V
5.020 V 10.040 V 5.016 V
5.000 V 10.000 V 5.000 V
0 V 0 V 1.000 V
1.25 mV 2.5 mV
to to
to
0 to 5 V 0 to 10 V 1 to 5 V
-0.020 V -0.040 V 0.984 V
6 5 4 3 2
D6 D5 D4 D3 D2
DA374
0 to 20 4 to 20
mA mA
20.080 20.064
mA mA
20.080 20.064
mA mA
20.000 20.000
mA mA
0 mA 4.000 mA
5.0 µ A 4.0 µ A
1 mV
0 to 20 mA 4 to 20 mA
0 mA 3.936 mA
model 3000 Analog module User's Manual
1 0
D1 D0
Remark
Limited
by upper
limit