Table of Contents
Advertisement
Setting satellite receiver's brand and
channel
After installation, set the satellite receiver's brand and
channel correctly; otherwise, the Satellite Controller
cannot work correctly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
A
Turn on the satellite receiver.
Turn on the satellite receiver's power.
B
Access the Main Menu screen.
Press SET UP.
C
Access the "SAT/GUIDE PR" screen.
A Press w e to move the
arrow to "INITIAL SET
UP", then press ENTER.
B Press w e to move the
arrow to "SAT/GUIDE
PR", then press ENTER.
D
Select the satellite receiver's brand.
A Press rt to move the arrow to "SAT BRAND", then
press ENTER.
B Press rt to select the brand code from the list on
page 30, then press ENTER.
● If the brand code you entered is invalid, the code field will be
reset. Enter the correct brand code again.
● If the unit is in playback or recording mode, you cannot set the
brand code.
E
Select the satellite receiver's channel for
testing.
Press the appropriate number
keys to enter one of the
channel positions on the
satellite receiver, then press
ENTER twice.
● You can select the channel
position between 1 to 999.
● After pressing ENTER, the unit
enters the Test mode.
29
Advertisement
Table of Contents
