Chapter 7 Application Interface
7.4
Assignment of FL911 Management Blocks
The management blocks of the FL911 are assigned to the following blocks on the
TC-net I/O loop.
96+(TC-net I/O loop address of the SA911/SA912 to which the FL911 is
installed -3)×16+TC-net I/O bus address at which the FL911 is installed
HW healthy information
It is counter (32-bit) information indicating that the hardware is running.
76
6F8C1375
(Example) TC-net I/O loop address of the SA911/SA912 to which the FL911 is
installed: 5
TC-net I/O bus address at which the FL911 is installed: 2
96+(5-3)×16+2=130 blocks
In this example, the management blocks of the FL911 are assigned to 130
blocks.
The content of the management blocks are shown below.
offset b15
0
2
5
6
8
10
32
48
offset b15
0
1
HW healthy information
SW healthy information
HW version information
SW version information
Reception message flag
Reserved
Online map
Cyclic data validity map
b0
b0