Periodical Inspection; Life Limited Parts - Toshiba nv Series Instruction Manual

Ventilation hole
Check the front panel and upper ventilation hole of the product for dust or stain.
If the ventilation hole is blocked by dust or stain, remove the dust with a vacuum
cleaner, and then wipe it with a soft cloth.
Indoor environment
Check if the temperature and humidity of the location where the product is located
are within the product specification range (Table A-1 in Appendix A).
6.1.2

Periodical inspection

To prevent accidents and use the product safely for long-term operation, it is
recommended performing a periodical inspection every 6 months.
Also, it is recommended replacing life limited parts regularly (refer to "6.2 Life
limited parts"). For a periodical inspection, consult with one of Toshiba's service
representatives.
6.2

Life Limited Parts

To use the product safely for a long time, replace the life limited parts regularly.
When replacing them, consult with one of Toshiba's service representatives.
The following table shows the life limited parts and their replacement cycles.
Table 6-1 Life limited parts and their recommended replacement cycles
Organic semiconductor aluminum solid
electrolytic capacitors
Switches, connectors
Part name
15 years
A sampling test every 10 years is recommended as
preventive maintenance.
Recommended replacement cycle
Unified Controller nv series FL-net (FL911) Module Instruction Manual

6.1 Life Limited Parts

45