Contec IPC Series User Manual page 41

Serial ATA Port 0~5
Port 0~5
Hot Plug
SATA Device Type
USB Configuration
USB Configuration Parameters
Feature
USB SS Physical
Connector #0~13
Legacy USB Support
XHCI Hand-off
USB Mass Storage
Driver Support
GSPI-Q3700-LLVA User's Manual
Enabled
Disabled
Enabled
Disabled
Hard Disk Drive
Solid State Drive
Option
Enable/Disable this USB Physical Connector.
Enabled
Once disable, any USB devices plug into
Disabled
the connector will not be detected by BIOS or OS
Enables Legacy USB support. AUTO option disables
Enabled
legacy support if no USB devices are connected.
Disabled
DISABLE option will keep USB devices available
Auto
only for EFI application
This is a workaround for OSes without XHCI hand-off
Enabled
support. The XHCI ownership change should be
Disabled
claimed by XHCI driver
Enabled
Enable/Disable USB Mass Storage Driver Support
Disabled
Enable or Disable SATA Port
Designates this port as Hot Pluggable
Identify the SATA port is connected to
Solid State Drive or Hard Disk Drive
Description
41