Contec IPC Series User Manual page 36

Power Control Configuration
System Power Control Configuration Parameters
Feature
Enable Hibernation
ACPI Sleep State
Restore AC Power Loss
Wake System from S5
via RTC
36
Option
Enabled
Disabled
S3 (Suspend to RAM)
Suspend Disabled
Power on
Power off
Enabled
Disabled
Description
Enables or Disables System ability to
Hibernate (OS/S4 Sleep State). This
option may be not effective with some OS.
Select the highest ACPI sleep state the
system will enter when the SUSPEND
button is pressed.
Specify what state to go to when power is
re-applied after a power failure (G3 state)
Enable or disable System wake on
alarm event. When enabled, System will
wake on the hr::min::sec
Specified/programmed by the Tools from OS
GSPI-Q3700-LLVA User's Manual