THOMSON TG608 Setup And User Manual page 50

5 Troubleshooting
Reset the Thomson Gateway via the Reset button
Proceed as follows:
1 Make sure the Thomson Gateway is turned on.
2 Push the Reset button until the Power LED lights red - this will take about 7 seconds.
3 Release the Reset button.
4 The Thomson Gateway restarts.
Your system administrator may have disabled the physical reset button of the Thomson
Gateway. In this case, a hardware reset to defaults is not possible.
44
ON
Reset
OFF
22V DC Console
1 2 3 4
E-DOC-CTC-20080118-0035 v4.0